[support] Drupal7 + Memcache install issue
Austin Einter
austin.einter at gmail.com
Mon Mar 18 01:24:44 UTC 2013
Hi
I did uninstall all php packages as below.
yum remove php php-mysql php-pear-MDB2-Driver-mysql php-intl php-mcrypt
php-pear-Mail-Mime php-pecl-igbinary php-common php-mbstring phpMyAdmin
php-pear php-pear-MDB2 php-pear-Net-SMTP php-pspell php-imap
php-php-gettext php-pdo php-pear-Net-Socket php-pear-Net-IDNA2 php-ldap
php-gd php-pear-Auth-SASL php-pear-db php-cli php-xml
php-pear-Mail-mimeDecode php-process
The only dependent app got affected is mailclient roundcube. I am not
worried too much of roundcube.
yum install php php-mysql php-pear-MDB2-Driver-mysql php-intl php-mcrypt
php-pear-Mail-Mime php-pecl-igbinary php-common php-mbstring phpMyAdmin
php-pear php-pear-MDB2 php-pear-Net-SMTP php-pspell php-imap
php-php-gettext php-pdo php-pear-Net-Socket php-pear-Net-IDNA2 php-ldap
php-gd php-pear-Auth-SASL php-pear-db php-cli php-xml
php-pear-Mail-mimeDecode php-process --disablerepo=remi
The I have installed all the packages where I disabled remi repo.
I checked , and looks things are working fine, atleast not encountered
issues.
Now I will go and check memcache...
Thanks a lot everybody.
-Austin
On Mon, Mar 18, 2013 at 6:18 AM, Austin Einter <austin.einter at gmail.com>wrote:
> Thanks Jamie, Lucas
>
> I am taking a system backup and proceeding. Meantime, do you recommend any
> particular repo, as I have seen remi is a nightmare for me. Should I
> install all php packages from base + epel repos. Kindly suggest.
>
>
> Best regards
>
>
>
> On Mon, Mar 18, 2013 at 6:17 AM, Austin Einter <austin.einter at gmail.com>wrote:
>
>> Thanks Jamie, Lucas
>>
>> I am taking a system backup and proceeding. Meantime, do you recommend any particular repo, as I have seen remi is a nightmare for me. Should I install all php packages from base + epel repos. Kindly suggest.
>>
>>
>> Best regards
>>
>> -Austin
>>
>>
>>
>> On Mon, Mar 18, 2013 at 5:53 AM, Lucas D Hedding <lucashedding at gmail.com>wrote:
>>
>>> There are no visible dependencies between solr, clamd, varnish, etc and
>>> PHP. Take a system backup and try it.
>>>
>>> Lucas
>>>
>>>
>>> On Sun, Mar 17, 2013 at 7:13 PM, Austin Einter <austin.einter at gmail.com>wrote:
>>>
>>>> One more installation tikka 1.3 , with all these apps already
>>>> installed, I am bit nervous to uninstall PHP 5.4 and install PHP 5.3.
>>>>
>>>> Anyother alternatives....
>>>>
>>>> -Kamal
>>>>
>>>>
>>>> On Mon, Mar 18, 2013 at 5:36 AM, Austin Einter <austin.einter at gmail.com
>>>> > wrote:
>>>>
>>>>> Dear Jamie Holly
>>>>> Thanks for the input. Now already I have installed many applications
>>>>> such as apache, mysql 5.5, apache solr, clamd, dovecot, amavisd, varnish
>>>>> etc. If I uninstall php 5.4 and install php 5.3 now, I am NOT sure if it
>>>>> will break anything. Has anybody done this anytime, kindly share...
>>>>>
>>>>> Thanks
>>>>> --Austin
>>>>>
>>>>>
>>>>> On Sun, Mar 17, 2013 at 10:37 PM, Jamie Holly <
>>>>> hovercrafter at earthlink.net> wrote:
>>>>>
>>>>>> I assume you're talking about CentOS 6.3, since 7 isn't available.
>>>>>>
>>>>>> First, I recommend going with PHP 5.3. There are a lot of contrib
>>>>>> modules that still have problems in 5.4. 5.3 is what comes with CentOS 6,
>>>>>> and installs without a problem, including APC and Memcache. I have a server
>>>>>> running it that gets about 1/4 million pageviews per day.
>>>>>>
>>>>>> Also Remi's repository is always a nightmare. You are seeing that
>>>>>> here with broken dependencies (wanting different versions of libjpeg).
>>>>>> Since Remi does a lot of dependency breaks, I would recommend asking at
>>>>>> their forum for help:
>>>>>>
>>>>>> http://forums.famillecollet.com/
>>>>>>
>>>>>> But again, I strongly recommend going with PHP 5.3. It's a lot less
>>>>>> headache not only from CentOS, but also from Drupal.
>>>>>>
>>>>>> Jamie Hollyhttp://www.intoxination.net http://www.hollyit.net
>>>>>>
>>>>>> On 3/17/2013 10:47 AM, Austin Einter wrote:
>>>>>>
>>>>>> Dear All
>>>>>> I am almost blocked regarding this issue.
>>>>>>
>>>>>> It looks to me anything I want to install that invoves PECL , my
>>>>>> machine does not work properly.
>>>>>> My experience with APC was so bad, finally I just left it off.
>>>>>>
>>>>>> Regarding Memcache support for Drupal 7, Just to make sure that
>>>>>> there is no dependency issues, I tried to build the required stuff.
>>>>>>
>>>>>> I built libevent, memcached. It went smooth. I was able to start
>>>>>> memcached service properly.
>>>>>>
>>>>>> Next, I wanted to build php-pecl-memcache. Here is uncovered certain
>>>>>> issues.
>>>>>> I downloaded php-pecl-memcache 2.2.7.
>>>>>>
>>>>>> Found instructions at
>>>>>> http://install_php_memcache.onlinephpfunctions.com/ to build.
>>>>>>
>>>>>> When I execute phpize command I get
>>>>>>
>>>>>> *Can't find PHP headers in /usr/include/php
>>>>>> The php-devel package is required for use of this command.
>>>>>> *
>>>>>> I tried to install php-devel package. It gives below error
>>>>>>
>>>>>> *--> Finished Dependency Resolution
>>>>>> Error: Package: php-gd-5.4.13-1.el6.remi.x86_64 (remi)
>>>>>> Requires: libjpeg.so.62(LIBJPEG_6.2)(64bit)
>>>>>> You could try using --skip-broken to work around the problem
>>>>>> *
>>>>>> But libjpeg is already installed.
>>>>>> *[root at ip-173-201-189-43 memcache-2.2.7]#
>>>>>> [root at ip-173-201-189-43 memcache-2.2.7]# rpm -qa | grep libjpeg
>>>>>> libjpeg-6b-46.el6.x86_64
>>>>>> [root at ip-173-201-189-43 memcache-2.2.7]#
>>>>>> *
>>>>>> Now I am clueless how can I support Memcache in D7 site.
>>>>>>
>>>>>>
>>>>>> Did anybody face this issue anytime, any pointers highly
>>>>>> appreciated.
>>>>>>
>>>>>> Thanks
>>>>>> -Austin
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Sun, Mar 17, 2013 at 5:32 PM, Austin Einter <
>>>>>> austin.einter at gmail.com> wrote:
>>>>>>
>>>>>>> Dear All
>>>>>>> I am facing some issues with Memcache install in a Drupal 7 site.
>>>>>>> Environment CentOs 7.3, Drupal 7.15
>>>>>>>
>>>>>>> 1. First I Installed memcached using yum command (tried two times
>>>>>>> one time from remi repo and other time from base repo).
>>>>>>> 2. I configured /etc/sysconfig/memcacche config file
>>>>>>> 3. Started memached service
>>>>>>>
>>>>>>> Looks everything went fine.
>>>>>>>
>>>>>>> Then I
>>>>>>> 1. installed php-pecl-memcache from remi repo
>>>>>>> 2. enabled memcache module in drupal
>>>>>>>
>>>>>>> Added below lines in settings.php file
>>>>>>>
>>>>>>> include_once('./includes/cache.inc');
>>>>>>> include_once('./sites/all/modules/memcache/memcache.inc');
>>>>>>> $conf['cache_backends'][] =
>>>>>>> 'sites/all/modules/memcache/memcache.inc';
>>>>>>> $conf['cache_default_class'] = 'MemCacheDrupal';
>>>>>>> $conf['cache_class_cache_form'] = 'DrupalDatabaseCache';
>>>>>>>
>>>>>>>
>>>>>>> After that I restarted memcached, httpd service.
>>>>>>>
>>>>>>> Next I am unable to access my site. If I do not use memcache it is
>>>>>>> running fine, once i enable memcache it does not run.
>>>>>>>
>>>>>>> Anybody has faced this issue.
>>>>>>>
>>>>>>> Kindly guide how to resolve this issue.
>>>>>>>
>>>>>>> Thanks
>>>>>>> Austin
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> [ Drupal support list | http://lists.drupal.org/ ]
>>>>>>
>>>>>
>>>>>
>>>>
>>>> --
>>>> [ Drupal support list | http://lists.drupal.org/ ]
>>>>
>>>
>>>
>>> --
>>> [ Drupal support list | http://lists.drupal.org/ ]
>>>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.drupal.org/pipermail/support/attachments/20130318/a19f28d0/attachment-0001.html
More information about the support
mailing list