[support] Drupal7 + Memcache install issue
Austin Einter
austin.einter at gmail.com
Mon Mar 18 02:25:31 UTC 2013
I experience the same issue. I installed PHP 5.3, as you can see below.
With that if I enable memcache in my settings.php, then my site goes down.
Kindly somebody help.
[root at ip-173-201-189-43 necs14]# rpm -qa | grep php
php-pear-1.9.4-4.el6.noarch
php-pdo-5.3.3-14.el6_3.x86_64
php-pear-Net-IDNA2-0.1.1-3.el6.noarch
php-pear-Auth-SASL-1.0.4-1.el6.noarch
phpMyAdmin-3.5.7-1.el6.noarch
php-intl-5.3.3-14.el6_3.x86_64
php-mbstring-5.3.3-14.el6_3.x86_64
php-pear-MDB2-2.5.0-0.3.b3.el6.noarch
php-php-gettext-1.0.11-3.el6.noarch
php-mcrypt-5.3.3-1.el6.x86_64
php-pear-Mail-mimeDecode-1.5.5-1.el6.noarch
php-pspell-5.3.3-14.el6_3.x86_64
php-xml-5.3.3-14.el6_3.x86_64
php-pecl-memcache-3.0.5-4.el6.x86_64
php-common-5.3.3-14.el6_3.x86_64
php-pear-Mail-Mime-1.8.4-1.el6.noarch
php-5.3.3-14.el6_3.x86_64
php-mysql-5.3.3-14.el6_3.x86_64
php-pear-Net-SMTP-1.6.1-1.el6.noarch
php-imap-5.3.3-14.el6_3.x86_64
php-ldap-5.3.3-14.el6_3.x86_64
php-pear-Net-Socket-1.0.10-1.el6.noarch
php-pear-MDB2-Driver-mysql-1.5.0-0.1.b3.el6.noarch
php-process-5.3.3-14.el6_3.x86_64
php-cli-5.3.3-14.el6_3.x86_64
php-gd-5.3.3-14.el6_3.x86_64
php-pecl-igbinary-1.1.1-3.el6.x86_64
[root at ip-173-201-189-43 necs14]#
Regards
Austin
On Mon, Mar 18, 2013 at 6:54 AM, Austin Einter <austin.einter at gmail.com>wrote:
> Hi
> I did uninstall all php packages as below.
>
> yum remove php php-mysql php-pear-MDB2-Driver-mysql php-intl php-mcrypt
> php-pear-Mail-Mime php-pecl-igbinary php-common php-mbstring phpMyAdmin
> php-pear php-pear-MDB2 php-pear-Net-SMTP php-pspell php-imap
> php-php-gettext php-pdo php-pear-Net-Socket php-pear-Net-IDNA2 php-ldap
> php-gd php-pear-Auth-SASL php-pear-db php-cli php-xml
> php-pear-Mail-mimeDecode php-process
>
> The only dependent app got affected is mailclient roundcube. I am not
> worried too much of roundcube.
>
> yum install php php-mysql php-pear-MDB2-Driver-mysql php-intl php-mcrypt
> php-pear-Mail-Mime php-pecl-igbinary php-common php-mbstring phpMyAdmin
> php-pear php-pear-MDB2 php-pear-Net-SMTP php-pspell php-imap
> php-php-gettext php-pdo php-pear-Net-Socket php-pear-Net-IDNA2 php-ldap
> php-gd php-pear-Auth-SASL php-pear-db php-cli php-xml
> php-pear-Mail-mimeDecode php-process --disablerepo=remi
>
> The I have installed all the packages where I disabled remi repo.
>
> I checked , and looks things are working fine, atleast not encountered
> issues.
>
> Now I will go and check memcache...
>
> Thanks a lot everybody.
>
> -Austin
>
>
>
> On Mon, Mar 18, 2013 at 6:18 AM, Austin Einter <austin.einter at gmail.com>wrote:
>
>> Thanks Jamie, Lucas
>>
>> I am taking a system backup and proceeding. Meantime, do you recommend
>> any particular repo, as I have seen remi is a nightmare for me. Should I
>> install all php packages from base + epel repos. Kindly suggest.
>>
>>
>> Best regards
>>
>>
>>
>> On Mon, Mar 18, 2013 at 6:17 AM, Austin Einter <austin.einter at gmail.com>wrote:
>>
>>> Thanks Jamie, Lucas
>>>
>>> I am taking a system backup and proceeding. Meantime, do you recommend any particular repo, as I have seen remi is a nightmare for me. Should I install all php packages from base + epel repos. Kindly suggest.
>>>
>>>
>>>
>>> Best regards
>>>
>>> -Austin
>>>
>>>
>>>
>>> On Mon, Mar 18, 2013 at 5:53 AM, Lucas D Hedding <lucashedding at gmail.com
>>> > wrote:
>>>
>>>> There are no visible dependencies between solr, clamd, varnish, etc and
>>>> PHP. Take a system backup and try it.
>>>>
>>>> Lucas
>>>>
>>>>
>>>> On Sun, Mar 17, 2013 at 7:13 PM, Austin Einter <austin.einter at gmail.com
>>>> > wrote:
>>>>
>>>>> One more installation tikka 1.3 , with all these apps already
>>>>> installed, I am bit nervous to uninstall PHP 5.4 and install PHP 5.3.
>>>>>
>>>>> Anyother alternatives....
>>>>>
>>>>> -Kamal
>>>>>
>>>>>
>>>>> On Mon, Mar 18, 2013 at 5:36 AM, Austin Einter <
>>>>> austin.einter at gmail.com> wrote:
>>>>>
>>>>>> Dear Jamie Holly
>>>>>> Thanks for the input. Now already I have installed many applications
>>>>>> such as apache, mysql 5.5, apache solr, clamd, dovecot, amavisd, varnish
>>>>>> etc. If I uninstall php 5.4 and install php 5.3 now, I am NOT sure if it
>>>>>> will break anything. Has anybody done this anytime, kindly share...
>>>>>>
>>>>>> Thanks
>>>>>> --Austin
>>>>>>
>>>>>>
>>>>>> On Sun, Mar 17, 2013 at 10:37 PM, Jamie Holly <
>>>>>> hovercrafter at earthlink.net> wrote:
>>>>>>
>>>>>>> I assume you're talking about CentOS 6.3, since 7 isn't available.
>>>>>>>
>>>>>>> First, I recommend going with PHP 5.3. There are a lot of contrib
>>>>>>> modules that still have problems in 5.4. 5.3 is what comes with CentOS 6,
>>>>>>> and installs without a problem, including APC and Memcache. I have a server
>>>>>>> running it that gets about 1/4 million pageviews per day.
>>>>>>>
>>>>>>> Also Remi's repository is always a nightmare. You are seeing that
>>>>>>> here with broken dependencies (wanting different versions of libjpeg).
>>>>>>> Since Remi does a lot of dependency breaks, I would recommend asking at
>>>>>>> their forum for help:
>>>>>>>
>>>>>>> http://forums.famillecollet.com/
>>>>>>>
>>>>>>> But again, I strongly recommend going with PHP 5.3. It's a lot less
>>>>>>> headache not only from CentOS, but also from Drupal.
>>>>>>>
>>>>>>> Jamie Hollyhttp://www.intoxination.net http://www.hollyit.net
>>>>>>>
>>>>>>> On 3/17/2013 10:47 AM, Austin Einter wrote:
>>>>>>>
>>>>>>> Dear All
>>>>>>> I am almost blocked regarding this issue.
>>>>>>>
>>>>>>> It looks to me anything I want to install that invoves PECL , my
>>>>>>> machine does not work properly.
>>>>>>> My experience with APC was so bad, finally I just left it off.
>>>>>>>
>>>>>>> Regarding Memcache support for Drupal 7, Just to make sure that
>>>>>>> there is no dependency issues, I tried to build the required stuff.
>>>>>>>
>>>>>>> I built libevent, memcached. It went smooth. I was able to start
>>>>>>> memcached service properly.
>>>>>>>
>>>>>>> Next, I wanted to build php-pecl-memcache. Here is uncovered
>>>>>>> certain issues.
>>>>>>> I downloaded php-pecl-memcache 2.2.7.
>>>>>>>
>>>>>>> Found instructions at
>>>>>>> http://install_php_memcache.onlinephpfunctions.com/ to build.
>>>>>>>
>>>>>>> When I execute phpize command I get
>>>>>>>
>>>>>>> *Can't find PHP headers in /usr/include/php
>>>>>>> The php-devel package is required for use of this command.
>>>>>>> *
>>>>>>> I tried to install php-devel package. It gives below error
>>>>>>>
>>>>>>> *--> Finished Dependency Resolution
>>>>>>> Error: Package: php-gd-5.4.13-1.el6.remi.x86_64 (remi)
>>>>>>> Requires: libjpeg.so.62(LIBJPEG_6.2)(64bit)
>>>>>>> You could try using --skip-broken to work around the problem
>>>>>>> *
>>>>>>> But libjpeg is already installed.
>>>>>>> *[root at ip-173-201-189-43 memcache-2.2.7]#
>>>>>>> [root at ip-173-201-189-43 memcache-2.2.7]# rpm -qa | grep libjpeg
>>>>>>> libjpeg-6b-46.el6.x86_64
>>>>>>> [root at ip-173-201-189-43 memcache-2.2.7]#
>>>>>>> *
>>>>>>> Now I am clueless how can I support Memcache in D7 site.
>>>>>>>
>>>>>>>
>>>>>>> Did anybody face this issue anytime, any pointers highly
>>>>>>> appreciated.
>>>>>>>
>>>>>>> Thanks
>>>>>>> -Austin
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Sun, Mar 17, 2013 at 5:32 PM, Austin Einter <
>>>>>>> austin.einter at gmail.com> wrote:
>>>>>>>
>>>>>>>> Dear All
>>>>>>>> I am facing some issues with Memcache install in a Drupal 7 site.
>>>>>>>> Environment CentOs 7.3, Drupal 7.15
>>>>>>>>
>>>>>>>> 1. First I Installed memcached using yum command (tried two times
>>>>>>>> one time from remi repo and other time from base repo).
>>>>>>>> 2. I configured /etc/sysconfig/memcacche config file
>>>>>>>> 3. Started memached service
>>>>>>>>
>>>>>>>> Looks everything went fine.
>>>>>>>>
>>>>>>>> Then I
>>>>>>>> 1. installed php-pecl-memcache from remi repo
>>>>>>>> 2. enabled memcache module in drupal
>>>>>>>>
>>>>>>>> Added below lines in settings.php file
>>>>>>>>
>>>>>>>> include_once('./includes/cache.inc');
>>>>>>>> include_once('./sites/all/modules/memcache/memcache.inc');
>>>>>>>> $conf['cache_backends'][] =
>>>>>>>> 'sites/all/modules/memcache/memcache.inc';
>>>>>>>> $conf['cache_default_class'] = 'MemCacheDrupal';
>>>>>>>> $conf['cache_class_cache_form'] = 'DrupalDatabaseCache';
>>>>>>>>
>>>>>>>>
>>>>>>>> After that I restarted memcached, httpd service.
>>>>>>>>
>>>>>>>> Next I am unable to access my site. If I do not use memcache it is
>>>>>>>> running fine, once i enable memcache it does not run.
>>>>>>>>
>>>>>>>> Anybody has faced this issue.
>>>>>>>>
>>>>>>>> Kindly guide how to resolve this issue.
>>>>>>>>
>>>>>>>> Thanks
>>>>>>>> Austin
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> [ Drupal support list | http://lists.drupal.org/ ]
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>> --
>>>>> [ Drupal support list | http://lists.drupal.org/ ]
>>>>>
>>>>
>>>>
>>>> --
>>>> [ Drupal support list | http://lists.drupal.org/ ]
>>>>
>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.drupal.org/pipermail/support/attachments/20130318/26edb732/attachment.html
More information about the support
mailing list