Thanks all for your help. I was able to get site1.dev and site2.dev going locally with my single drupal installation. But I have a new question. Let's say I want to share my new site1.dev and site2.dev in progress with someone on the Internet, how can this person get access to them with my server's ip address? Is this possible? If not, how can I do it? Again, I don't have actual domain names set up yet. Thanks in advance! Tom On Sat, Aug 13, 2011 at 8:42 PM, Luis Paulo <luis.barbas@gmail.com> wrote:
On Fri, Aug 12, 2011 at 20:40, Jamie Holly <hovercrafter@earthlink.net> wrote:
Simply:
127.0.0.1 site1.dev 127.0.0.1 site2.dev
(I use .dev for all my development stuff - since this is being done locally you can make anything you want!)
Not that it won't work, but I think the canonical way is 127.0.0.1 localhost site1.dev site2.dev
Regards Luis -- [ Drupal support list | http://lists.drupal.org/ ]
The code and databases would have to reside on the server (simple data transfers). You would need at least one domain name, and you could use ports for the rest (example.com:80, example.com:81, etc.). Also, .info domain names are usually really cheap (at least through GoDaddy) and are commonly "throw away" names. Nancy Injustice anywhere is a threat to justice everywhere. -- Dr. Martin L. King, Jr.
________________________________ From: EPA WC
Thanks all for your help. I was able to get site1.dev and site2.dev going locally with my single drupal installation. But I have a new question. Let's say I want to share my new site1.dev and site2.dev in progress with someone on the Internet, how can this person get access to them with my server's ip address? Is this possible? If not, how can I do it? Again, I don't have actual domain names set up yet.
If this is just one or two people and your public IP is pretty static, then you could give them your host entries you created, except change the IPs to your public IP, and have them install them on your computer. You can also set up a dynamic DNS server through one of the services listed on this page: http://dnslookup.me/dynamic-dns/ Just make sure if you have a router that port forwarding is set to your server and that the ports are not blocked by your firewall. Jamie Holly http://www.intoxination.net http://www.hollyit.net On 8/15/2011 1:57 PM, EPA WC wrote:
Thanks all for your help. I was able to get site1.dev and site2.dev going locally with my single drupal installation. But I have a new question. Let's say I want to share my new site1.dev and site2.dev in progress with someone on the Internet, how can this person get access to them with my server's ip address? Is this possible? If not, how can I do it? Again, I don't have actual domain names set up yet.
Thanks in advance! Tom
On Sat, Aug 13, 2011 at 8:42 PM, Luis Paulo <luis.barbas@gmail.com> wrote:
On Fri, Aug 12, 2011 at 20:40, Jamie Holly <hovercrafter@earthlink.net> wrote:
Simply:
127.0.0.1 site1.dev 127.0.0.1 site2.dev
(I use .dev for all my development stuff - since this is being done locally you can make anything you want!)
Not that it won't work, but I think the canonical way is 127.0.0.1 localhost site1.dev site2.dev
Regards Luis -- [ Drupal support list | http://lists.drupal.org/ ]
On Tue, Aug 16, 2011 at 03:29, Jamie Holly <hovercrafter@earthlink.net> wrote:
If this is just one or two people and your public IP is pretty static, then you could give them your host entries you created, except change the IPs to your public IP, and have them install them on your computer.
You can also set up a dynamic DNS server through one of the services listed on this page:
http://dnslookup.me/dynamic-dns/
Just make sure if you have a router that port forwarding is set to your server and that the ports are not blocked by your firewall.
Jamie Holly http://www.intoxination.net http://www.hollyit.net
On 8/15/2011 1:57 PM, EPA WC wrote:
Thanks all for your help. I was able to get site1.dev and site2.dev going locally with my single drupal installation. But I have a new question. Let's say I want to share my new site1.dev and site2.dev in progress with someone on the Internet, how can this person get access to them with my server's ip address? Is this possible? If not, how can I do it? Again, I don't have actual domain names set up yet.
Thanks in advance! Tom
On Sat, Aug 13, 2011 at 8:42 PM, Luis Paulo <luis.barbas@gmail.com> wrote:
On Fri, Aug 12, 2011 at 20:40, Jamie Holly <hovercrafter@earthlink.net> wrote:
Simply:
127.0.0.1 site1.dev 127.0.0.1 site2.dev
(I use .dev for all my development stuff - since this is being done locally you can make anything you want!)
Not that it won't work, but I think the canonical way is 127.0.0.1 localhost site1.dev site2.dev
Regards Luis -- [ Drupal support list | http://lists.drupal.org/ ]
-- [ Drupal support list | http://lists.drupal.org/ ]
I understood you are searching for a temporary solution, just to show your sites to a few people. any way, here is how I do it, for 15$/year. I use a dynamic dns at dyndns with Dynamic DNS Pro service. A dynamic ip pretend to simulate a real dns name service (to some degree) and a fixed ip. Say you register a dns name like you.dyndns.org (you'll have to install a software and probably set a cron job that will check and renew your ip against the dns if you don't have a fixed ip). If you are using Dynamic DNS Pro service, not the free one, then everything ending with you.dyndns.org will be directed to you. It may exist free solutions that do the same (?) Add to the ServerAlias directive site1.you.dyndns.org, at site1 conf file, Then read the settings.php to create the new sites/ directories (you may create dirs that are symbolic links to the existing dir). On drupal 7, you may use the sites.php file instead. Now you may (after apache restart) tell others to connect to http://site1.you.dyndns.org If I may, with Nancy solution you'll have to configure the Apache Listen directive and most likely the <VirtualHost *:80> setting. Has the advantage that you just need you.dyndns.org redirected to you, not *.you.dyndns.org. Then, like before, read the settings.php to name the sites/ directories but now to select based on port (again, you may create dirs that are symbolic links to the existing dir) * If you are installing on a non-standard port number, prefix the * hostname with that number. For example, * http://www.drupal.org:8080/mysite/test/ could be loaded from * sites/8080.www.drupal.org.mysite.test/. don't know if you may use sites.php on drupal 7 for the ports purpose. Also don't know if you can use ports solution with ip address (without a dns name), like http://your_ip:81 (?). Never tried it. Maybe through sites/81.ypur_ip (?) Don't think so, and it will only be reasonable with a fixed ip. if you have a router, you'll have to set port forwarding accordingly for any solution. On the other end, you may check a domain/hosting service with drupal where you may upload your dev site to show. Hope I'm making sense. Regards Luis
participants (4)
-
EPA WC -
Jamie Holly -
Luis Paulo -
Ms. Nancy Wichmann