support February 2010

support@drupal.org

83 participants
92 discussions

Social bookmarking with drupal
by Dipen 26 Feb '10

26 Feb '10

Hi, Searching for social bookmarking module on drupal yields many results but all of them (untill i missed any) integrate a 3rd party service like share this, add to any etc etc. What I really wanted was a module which doesnt integrate aggregator of social book marking sites, coz I feel theming them is tough (?) I would like to lay my bookmarking buttons as I like and not be obliged to use drop down of share this or add to any. This was my search - http://drupal.org/project/modules?filters=drupal_core:87&text=social%20book… So does anyone know a module which has integration of major services but without a intermediary (like share this) and has theming extension points? I found out http://drupal.org/project/sharepal but that doesnt have any code written for it. Also if you think that "intermediary" integration modules have good theming extension points, please advice. Definition of intermediary in this context - Services like Add to Any, Share this which aggregate all major social bookmarking services and provides u a widget. Dipen

2 1

JQuery plugin in module
by ktt 26 Feb '10

26 Feb '10

Hello, I would like to enable http://drupal.org/project/uicarousel in my custom plugin by default. But due to lack of documentation it is quite difficult to grasp main things. Ui carousel gives just one line: $('#carousel-basic').carousel(); Thank you in advance for any pointers. Kioshin

1 0

Admin login with login block disabled
by Sven Richter 25 Feb '10

25 Feb '10

Hi everybody, i have a weird problem, i installed drupal 6.15 and the actual 7.02alpha release and within both i get the same results. I do a clean install, and then, according to the docs, i removed the user login block from blocks under site building. I logged out and when i try to relog with site.com/drupal/user or site.com/drupal/?q=user i get a message that the requested site cannot be found in the first case, or in the second case, i dont have the right to access that page. The same happens for the site.com/drupal/?q=admin. I reinstalled drupal three times, with the same result, so i think there must be something wrong with my setup, or with drupal :D Any Ideas? Greetings -- Sven Richter Dipl.-Inf. (FH)

4 7

preg_match failes where egrep and PERL succeed?
by Luke 25 Feb '10

25 Feb '10

Hello I do not wish to say how long I have been trying to figure this out. I have a node with a CCK textarea, containing data like this: 123|aabbcc 456|10fe1c ... In other words, a three digit reference to a hex code. I am attempting to use a computed field to search that node for the reference (three digit code), and return only the hex value. I am using a regular expression to do this. I have tried several varients of the regexp, all of which work whether I use them in PERL or egrep. However, when I use drush to test them with preg_match, the test fails every time. What might I be doing wrong here? This was supposed to be done hours ago, of course. drush 2> /dev/null eval '$datanode = node_load(2736); $res = preg_match('\''/^200\|([0-9a-fA-F]+)/'\'', $datanode->field_int_data[0][value], $match); echo $res . ": " . $match[1] . "\n";' The output is: 0: However: drush 2> /dev/null eval '$datanode = node_load(2736); echo $datanode->field_int_data[0][value];' | perl -e 'while (<>) { print $_ if (/^200\|([0-9a-zA-Z]+)/); }' I get: 200|EEC57C I gather that the PCRE library has changed some things, but I did not think the handling of subpatterns was one of them, so I am quite perplexed. It's probably something quite simple. N.B. The reason I am redirecting STDERR to null, is because I get this warning when running drush. PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20060613+lfs/imagick.so' - libWand.so.9: cannot open shared object file: No such file or directory in Unknown on line 0 Which is referenced at http://www.mail-archive.com/debian-bugs-dist@lists.debian.org/msg741806.html, with no apparent resolution. Regards, Luke

3 4

delete leading and trailing spaces from user input (on title, etc.)
by Benjamin Jacob 25 Feb '10

25 Feb '10

Hi All, I tried to google this but found all php and C++ tricks to trim leading and trailing spaces from a given string, which I already knew of (for a change). In drupal I tried adding a new CCK node with a title having quite a few spaces at the start, in between words and at the end as well. As expected the visible output is nicely trimmed, but the variable value itself stored contains exactly how I entered it (with spaces and all). How do I store the desired trimmed data into my database? Regards - Ben

1 0

Gmap + location marker error
by Alexander Arul 25 Feb '10

25 Feb '10

Hi, I've enabled gmap+location modules and created a bunch of nodes with location defined for them. I'm using views to generate a map on which these nodes are shown as markers. However, the fields I want to show up inside the marker popups are empty. Only the label for each field comes through. For example, if I want the title of a node, only "Title:" shows up on the marker popups. Please see the dev site below for clearer understanding. http://studiomhotel.adwright.com.sg/location Any ideas? Cheers Alex

1 0

Forms and coresponding .PDFs
by brendan, fresh-off.com 25 Feb '10

25 Feb '10

Hello List, Does anybody know of a good module to for creating forms and generating corresponding .PDF's? I have a client with a rather lengthy .PDF questionnaire which they are looking to recreate in an online format. I googled around and did find a Webform module that sorta does that - but only for D5. I'm looking for a D6 (even D7 if it exists yet) module. Anybody know of any such thing? If not, I've never tried printing out a CCK form, or creating a print style sheet for a CCK node. Is that another reasonable route to go? Thanks for any input! --- brendan, fresh-off.com Creative Direction & Consultation: Web | Print | Brand http://fresh-off.com hello(a)fresh-off.com 206.328.1067

3 2

Re: [support] Limiting a term to a type
by Luke (Drupical) 25 Feb '10

25 Feb '10

That I could. If it would solve the need described, I would be set. However, it doesn't, as the question states that I need term level type limitations, not vocabulary level limitations. Sorry If My examples were unclear. Regards, Luke -----Original Message----- From: Brian Choc <bchoc(a)t4tcolorado.org> Sent: Wednesday, February 24, 2010 17:41 To: support(a)drupal.org Subject: Re: [support] Limiting a term to a type In to /admin/content/taxonomy you can "edit vocabulary" and have a chosen vocabulary apply to only certain types of nodes. So you can have different vocabularies only work for different types of nodes. Brian On Wed, Feb 24, 2010 at 1:46 PM, Luke (Drupical) <drupal(a)lists.tacticus.com> wrote: Is it possible to limit a taxonomy term to a content type? Example: I have a "catalog" taxonomy. Its types are "product", "foo product" and "bar product". It has a term "level a foos", containing 50 foo products. It also has "level B foos", containing 100 foo products. It has other terms which include only bar products, etc.. How to make sure that an authorized user doesn't accidentally put a bar product under term "level A foos"? Luke Luke (Drupical) -- [ Drupal support list | http://lists.drupal.org/ ]

1 0

Backup/Restore strategy
by Scott 25 Feb '10

25 Feb '10

I have a site that has become too large to effectively use the backup and Migrate module. I've just finished updating the site from my development platform and in order to migrate the latest version of the database I had to exclude the search_index table from the backup. To get around this I did backup the search_index table using phpmyadmin and importing it separately. Neither drupal nor phpmyadmin would restore the entire database as a single file. Does anyone have any recommendations to improve this situation? Thanks in advance, Scott

4 4

Limiting a term to a type
by Luke (Drupical) 24 Feb '10

24 Feb '10

Is it possible to limit a taxonomy term to a content type? Example: I have a "catalog" taxonomy. Its types are "product", "foo product" and "bar product". It has a term "level a foos", containing 50 foo products. It also has "level B foos", containing 100 foo products. It has other terms which include only bar products, etc.. How to make sure that an authorized user doesn't accidentally put a bar product under term "level A foos"? Luke Luke (Drupical)

2 1

← Newer
1
2
3
4
5
6
7
8
9
10
Older →

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

support February 2010