support

support@drupal.org

7912 discussions

was Paypal modules- now civicrm
by Roger 15 Jul '12

15 Jul '12

<snip> Hi Roger, You should take a look at CiviCRM, which is aimed at non-profits and charities. The way to make donations is very fine-grained. It might look a bit daunting at first, but it can do exactly what you want it to do. </snip> Thanks Eljay, it certainly seems the way to go. I'm about to try civicrm in my home drupal7 dev - I experimented a bit on my home pc some years ago in early drupal 6 and found it complex back then. Finding how to install civicrm in drupal 7 is not easy because much of the "civicrm stuff on the web" still defaults to drupal 6, and from what I see it's still a fairly daunting procedure. I haven't found suitable install instruction for drupal 7 . Do you know if they've made the install easier for drupal 7 and where I can find the apps please, or is it still a wget procedure. Thank you for any help Cheers Roger

3 3

Drupal 7 Marinelli 7.x-3.0-beta11 theme issue
by Austin Einter 15 Jul '12

15 Jul '12

Hi All I am using Marinelli 7.x-3.0-beta11 theme in Drupal 7. By default it has got several banners and automatically these banner images keep rotating. I want to remove these default banner images and keep new new banner images. In themes settings page, there is a way to delete existing images and choose new images. I did that. I deleted all old images and added new images. However, these new images are not showing up. Anybody has faced this issue previously. Kindly let me know how to fix it. Thanks Kamal

2 2

was paypal module now civicrm
by Roger 15 Jul '12

15 Jul '12

<snip> Hi Roger, You should take a look at CiviCRM, which is aimed at non-profits and charities. The way to make donations is very fine-grained. It might look a bit daunting at first, but it can do exactly what you want it to do. Good luck, Eljay </snip> Hi again Eljay I have installed civicrm on my home pc but cannot find where to change the currency. The recommended: http://wiki.civicrm.org/confluence/display/CRMDOC40/CiviCRM+Localisation ( The 'look' of the numeric value (amount) depends on the currency settings on the Administer » Configure » Global Settings » Localization page; you can directly provide thousands separator (US default: comma) and decimal delimiter (US default: dot).) as with most tutorial sites seems to be drupal 6 oriented and not yet updated. There are no Global settings in Drupal 7 other than CKeditor and these do not relate to civicrm. Confused and very frustrated Thanks Roger

4 3

Re: [support] support Digest, Vol 115, Issue 21
by Roger 15 Jul '12

15 Jul '12

If you continue down the line with Commerce module, you can create a product and using Rules (or implement a hook in code, but Rules will allow you to do it without programming) change the price at the time of order to the value of your CCK field. Will I wondered about this but ran into a problem where: 1. I couldn't find how to pick up the cck field value, put it in a view so the registrant can see what they've ordered and how much they paid. Nor to send that to paypal. 2. Couldn't find a way to display the cck field in the commerce form. Tried adding a field to the content type, tried modifying the product, but nothing permits addition of an integer into a cck field into a commerce form. There's gotta be a way, My senior moments are catching up with me and things don't click so easily. Can' get to grips with coding, php escapes me. If you can offer some guidance, that'd be great. thanks in advance Roger

1 0

paypal module/s
by Roger 14 Jul '12

14 Jul '12

We have the commerce and paypal modules set up and working in drupal 7. As a non profit organisation we cannot legally charge attendance for events but can request a donation which may be equal to, more or less than the suggested donation. The Commerce module seems to only permit fixed pricing in the /store/product section. I can set up other content types and cck fields to permit attendees to enter their donation, name and details but cannot find any way to send the details or payment to Paypal. Has anyone seen a module that may allow us to do this please. Or alternatively is there a way to send the reservations details stored by Drupal to paypal so that we can do reconciliation of the Drupal data to the paypal receipts. Thanks in advance Roger

3 2

Drupal website and Opera/Fidelio hospitality software
by Tom Smith 14 Jul '12

14 Jul '12

Hi, does anyone know or has experiences how to connect a Drupal website with Opera/Fidelio hospitality software? Thanks, Tom

1 0

page-init JS (setting window.location.hash) behaves differently if JS-aggregation is ON vs OFF. is it load-order, or something else?
by drupsupp＠eml.cc 12 Jul '12

12 Jul '12

my site's frontpage has a CSS3-only object (fwiw, an accordion). i've added a page .js init that contains (function($) { Drupal.behaviors.frontpage = { attach: function(context,settings) { --> window.location.hash = '#pane1'; which, on document.ready 'jumps to' the accordion "pane1" anchor tag, opening it as default. that init is loaded in a preprocess-page hook, --------------------------------------- <?php function sub_omega_alpha_preprocess_page(&$vars) { ... drupal_add_js( $pgn_theme_dir . '/js/all-p-init.js', array( 'type' => 'file', 'scope' => 'header', 'group' => JS_LIBRARY, 'every_page' => FALSE, 'weight' => -99, 'defer' => FALSE, 'cache' => TRUE, 'preprocess' => TRUE, ) ); if (drupal_is_front_page()) { ... drupal_add_js( $pgn_theme_dir . '/js/fp-init.js', array( 'type' => 'file', 'scope' => 'header', 'group' => JS_LIBRARY, 'every_page' => FALSE, 'weight' => -99, 'defer' => FALSE, 'cache' => TRUE, 'preprocess' => TRUE, ) ); } else { drupal_add_js( $pgn_theme_dir . '/js/not-fp-init.js', array( 'type' => 'file', 'scope' => 'header', 'group' => JS_LIBRARY, 'every_page' => FALSE, 'weight' => -99, 'defer' => FALSE, 'cache' => TRUE, 'preprocess' => TRUE, ) ); } ;} --------------------------------------- this works as expected if at .../admin/config/development/performance JavaScript agg is enabled, -------------------------------------- Bandwidth optimization External resources can be optimized automatically, which can reduce both the size and number of requests made to your website. [ ] Compress cached pages. [ ] Aggregate and compress CSS files. [X] Aggregate JavaScript files. -------------------------------------- The browser URL bar correctly displays the anticipated https://test.net/#pane1 If I simply toggle that setting OFF, - [X] Aggregate JavaScript files. + [ ] Aggregate JavaScript files. then everything works as always -- EXCEPT the accordion object is rendered initially in an all-closed state. I.e., that 'jump to' the anchor is not in-effect. In this case, the browser URL bar in-correctly displays https://test.net/ i.e., NO anchor tag. Since Omega, LabJS & Drupal core all could ostensibly play a part, I'm not sure what the singular cause of this difference in behavior might be. My gut tells me it's likely .js load-order being handled differently in the two cases. I'm not yet convinced ... Here's a diff of the page's ViewSource for the two cases -- js aggregation ON, and js aggregation off: --- js-agg-OFF.txt 2012-07-12 12:14:43.931189584 -0700 +++ js-agg-ON.txt 2012-07-12 12:15:30.382410736 -0700 @@ -76,30 +76,11 @@ </script> <script> // LABjs exclusion -$L = $L.script(["https://test.net/sites/all/modules/contrib/jquery_update/replace/jquery/1.7…", -"https://test.net/misc/jquery.once.js", -"https://test.net/sites/all/modules/contrib/labjs/replace/drupal.js", -"/data/webapps/cdn/www.pgnetwork.net/js/dialogextend/jquery.dialogextend.pack.js", -"https://test.net/sites/all/themes/sub_omega/js/all-p-init.js", ==> -"https://test.net/sites/all/themes/sub_omega/js/fp-init.js", -"https://test.net/sites/all/modules/contrib/jquery_update/replace/ui/ui/mini…", -"https://test.net/sites/all/modules/contrib/jquery_update/replace/ui/ui/mini…", -"https://test.net/sites/all/modules/contrib/jquery_update/replace/ui/externa…", -"https://test.net/sites/all/modules/contrib/jquery_update/replace/ui/ui/mini…", -"https://test.net/sites/all/modules/contrib/jquery_update/replace/ui/ui/mini…", -"https://test.net/sites/all/modules/contrib/jquery_update/replace/ui/ui/mini…", -"https://test.net/sites/all/modules/contrib/jquery_update/replace/ui/ui/mini…", -"https://test.net/sites/all/modules/contrib/jquery_update/replace/ui/ui/mini…", -"https://test.net/sites/all/modules/contrib/jquery_update/replace/ui/ui/mini…", -"https://test.net/sites/all/modules/contrib/views/js/jquery.ui.dialog.patch.…", -"https://test.net/sites/all/modules/contrib/admin_menu/admin_devel/admin_dev…", -"https://test.net/sites/all/modules/contrib/contentanalysis/contentanalysis.…", -"https://test.net/sites/all/modules/contrib/contentoptimizer/contentoptimize…", -"https://test.net/sites/all/modules/contrib/resp_img/resp_img.js", -"https://test.net/sites/all/modules/contrib/panels/js/panels.js", -"https://test.net/sites/all/modules/contrib/google_analytics/googleanalytics…", -"https://test.net/sites/all/themes/contrib/omega/omega/js/jquery.formalize.js", -"https://test.net/sites/all/themes/contrib/omega/omega/js/omega-mediaqueries…"]); +$L = $L.script(["https://test.net/sites/default/files/js/js_LP6eaYL3pE-X3CISx4yhE59L-xvxjYoQ…", ==> +"https://test.net/sites/default/files/js/js_r9tk7PwLQm4lcqNXt_DTdEfATxWT8fTa…", +"https://test.net/sites/default/files/js/js_4ZrSfhQVOw6i9znJCZe7jUN7u2jzAKWc…", +"https://test.net/sites/default/files/js/js_EtFFZ9lbcSXbmEJ6DdbkcmBheDx1eo7k…", +"https://test.net/sites/default/files/js/js_SqSPKHRdgR49lUgM5xyDHyrUmB1wUEtO…"]); </script> <script> $L = $L.wait(function() { @@ -108,7 +89,7 @@ </script> <script> $L = $L.wait(function() { -jQuery.extend(Drupal.settings, {"basePath":"\/","pathPrefix":"","ajaxPageState":...width: 1220px)"}}}}); +jQuery.extend(Drupal.settings, {"basePath":"\/","pathPrefix":"","ajaxPageState":...width: 1220px)"}}}}); }); </script>  where inside sites/default/files/js/js_r9tk7PwLQm4lcqNXt_DTdEfATxWT8fTavO9qp3cJB3E.js I find the relevant JS ... (function($) { Drupal.behaviors.frontpage = { attach: function(context,settings) { // 'jump to' the accordion pane#, opening it as default window.location.hash = '#pane1'; ... i understand this is a rather nitpicky/arcane issue. Presuming that load-order is the issue, I'm working, somewhat randomly atm, at finding a load-order in the unaggregated case that functions correctly. Any informed guidance as to what may specifically be the cause of this 'jump to tag' sensitivity to js aggregation state would be appreciated.

1 1

Drupal not recognizing custom tpl file
by Mutuku Ndeti 12 Jul '12

12 Jul '12

Dear All, Kindly assist. I have a site that is not picking a custom theme template file, although I have rebuilt the same site on another server and it's picking Thanks. -- Tel:254- 722-490994 www.agile.co.ke | www.jipambe.com

2 2

Limiting path arguments to hook_menu
by DTH 12 Jul '12

12 Jul '12

I have (in D7) function foo_menu() { $items = array(); $items['foo'] = array( 'title' => 'Foo', 'page arguments' => array("foo"), 'page callback' => 'super_page', 'access arguments' => array('access content'), 'file' => 'pages/super_page.inc', 'type' => MENU_CALLBACK, ); return $items } At the moment, /foo works as a path. However, so does /foo/bar etc, which calls the super_page callback. In reality I'd like this to 404. Is there something obvious I'm missing or do I need to count the number of arguments passed to things like super_page and return drupal_not_found()?

1 0

How to config 'Clamav' module?
by Nam PHAM 12 Jul '12

12 Jul '12

Hi everybody, I have a problem with 'clamav' module. After installing 'clamav' on my computer, I download and install this module for drupal site. As I see, there are two mode for scanning: - Daemon mode. - Executable mode. I can scan file in executable mode, but can't in daemon mode. I don't know how to config in 'clamav' settings page, I use default value: - host: localhost - port: 3310 When I try to upload it return error like this: - 'The selected file *test.txt* could not be uploaded. The anti-virus scanner was not able to check the file. The file cannot be uploaded.' But in admin/reports/dblog, It return blank. So I don't know why it doesn't work. Does anyone know how to config or what is problem? thank in advance for ideas. -- *Nam Pham* Phone: (+84) 932 830 330 Email: + nampham(a)mbm.vn + allstarsmen(a)gmail.com Skype: nampham-mbm Yahoo: allstars_men

1 0

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

support