support

support@drupal.org

7912 discussions

module Gallery Assist is enabled but where is content type Gallery ?
by Bruno Costacurta 28 Jul '10

28 Jul '10

Hello to All, I installed module Gallery Assist. Installation was fine and the module was enabled. All needed directories ..files/gallery_assist creation and saved options operation were successfully. From there I did RTFM (Read The Finest Manual) and also watched the tutorial video (see 'Create your first Gallery') for a Gallery setup and creation. Administer->Site configuration->Gallery assist is also fine. And indeed my content Image received two new items menu linked to Gallery Assist. But now how to create a new Gallery ? The problem is I cannot found any content Galllery (under menu Create content) to be able to create a Gallery content... I used to test this module few months ago, but then I removed it : maybe the problem is related : so how to re-install and re-enabled it in case of a incompleted removal operation ? Bye, Bruno -- Linux Counter #353844 http://counter.li.org/ ----------------------------------------------------------------

1 0

Dashboard Module How-To
by Lev Lafayette 28 Jul '10

28 Jul '10

Salutations Drupal support, I am looking after a Drupal intranet site for a small number of users (<100) and, as can be expected in any organisation, there is a full and frank discussion about what pages should be given priority (i.e., on the front page). I though that the Dashboard module would be a good way around this as, by its description, it seemed that it would allow users to determine this individually. What I have discovered however is a lack of a how-to documentation for setting up such a module other than the brief comments in the README. Does anyone know where such documentation can be found? Thanks in advance, -- Lev Lafayette, Systems Administrator, Victorian Partnership for Advanced Computing, lev(a)vpac.org "If you are sending a reply to a message or a posting be sure you summarize the original at the top of the message, or include just enough text of the original to give a context. This will make sure readers understand when they start to read your response." RFC 1855 110 Victoria Street phone: 03 9925 4909 Carlton South, Victoria 3053, Australia mobile: 0432 255 208

1 1

Madhusudhan Srinivasa has invited you to Dropbox
by Dropbox 27 Jul '10

27 Jul '10

We're excited to let you know that Madhusudhan Srinivasa has invited you to Dropbox! Madhusudhan Srinivasa has been using Dropbox to sync and share files online and across computers, and thought you might want it too. Visit http://www.dropbox.com/link/20.e1gkre0lyD/NjI2OTAwNDgwNw to get started. - The Dropbox Team ____________________________________________________ To stop receiving invites from Dropbox, please go to http://www.dropbox.com/bl/210b61802671/support%40drupal.org

1 0

User access to available updates
by Bob Morse 26 Jul '10

26 Jul '10

Anyone know of a simple way to give a user (site manager) access to admin/reports/updates without giving access to ' administer site configuration'?

3 3

autocomplete_widgets with webform module
by Kevin Davison 26 Jul '10

26 Jul '10

I'd like to be able to use Webform, but it doesn't offer an "autocomplete field" without customization. There isn't much information with Drupal.org about the best way to do this. http://drupal.org/project/autocomplete_widgets http://drupal.org/project/webform Any suggestions on how to add an autocomplete field a Webform? Is this an option? Converting Texfield into autocomplete using Drupal's Form API http://qandeelaslam.com/blogs/cck/converting-texfield-autocomplete-using-dr… Or create a simple module? HOWTO: Create Autocomplete on your CCK field or other field on Drupal http://drupalranch.com/Tutorial/How-To-Create-Autocomplete-on-your-CCK-fiel… Thank you, Kevin

1 0

ubercart delayed CC processing and still PCI compliant
by sebastian 26 Jul '10

26 Jul '10

Hello, Ubercart question here, trying various places to see if anyone has some suggestions... Here are two related threads: http://www.google.com/url?sa=t&source=web&cd=1&ved=0CBQQFjAA&url=http%3A%2F… http://www.ubercart.org/forum/support/14789/credit_card_storage_and_process… Q1: is it possible to use AUTH_CAPTURE with a paypal CC gateway? Q2: if so, how can we set it up so that we are PCI compliant [no CC numbers stored on our system] but still allows manual processing of the CC numbers only when the item(s) are shipped? I'm not sure where AUTH_CAPTUER is supposed to be set...? Is this a setting or in a php config file somewhere? versions: D6, U2 Thanks!! Sebastian.

1 0

Configuring blocks to show on different pages depending on theme
by Anisa 26 Jul '10

26 Jul '10

I've read through this: http://drupal.org/getting-started/6/admin/build/block. And I've done some searching, but I'm still confused, so I'll ask. When you configure a block (ie, you go into that block's specific configuration menu), is that per block, or is it per block, per theme. I thought it should be per block, per theme, but it seems to be per block. I was having some problems with sidebars in my default theme. I've posted an issue on it, but in the mean time, since the site is just a blog, I took the sidebars off the main site. I still needed them, though, for administration purposes. (I have the admin menu module, but sometimes it's nice to have the navigation block). However, I can't get the block configuration settings to be one theme only. If I changed it under A theme, then it was changed under B theme. I can change placement on the page by theme, but not whether it shows on the page at all. I realized a workaround when I remembered I could just set that the block only shows on admin pages, and set an admin theme, so that works for me. Is that how it works, or am I missing something? Anisa.

5 5

domain access automation
by Davide Galletti 25 Jul '10

25 Jul '10

Hi list, I would like to use domain access to create a multisite where a non technical user should be able to create a new site; when the user creates a new site/domain I would like to automate the creation of a new user with editor permission on the new domain, of a set of pages and menu items and maybe some other stuff... I am reading on actions and rules modules ... but I am still not sure whether they will be the right tool for the job; I'd appreciate any hint, thanks, Davide

1 0

Imagemagik or libgd ?
by Michel Morelli 24 Jul '10

24 Jul '10

Hi all, I have a VPS with 256Mb ram where I can exec/system external program. I'm building a website with some image resize/scale imagecache preset. In a perfomance/memory view is better libgd or imagemagik ? If I use imagemagik can I lower php memory_init ? M. -- Michel 'ZioBudda' Morelli michel(a)ziobuddalabs.it Sviluppo applicazioni CMS DRUPAL e web dinamiche (LAMP+Ajax) Telefono: 0200619074 Telefono Cell: +39-3939890025 -- Fax: +39-0291390660 http://www.ziobudda.net ICQ: 58351764 http://www.ziobuddalabs.it Skype: zio_budda http://www.ziodrupal.net MSN: michel(a)ziobuddalabs.it JABBER: michel(a)ziobuddalabs.it

1 0

Ajax Login/Register MODULE not working
by bharani kumar 24 Jul '10

24 Jul '10

Hi , I installed the AJAX LOGIN / REGISTER , I have enabled the login/register link block , When i click the login link , it showing the popup , BUT LOGIN FORM is missing ....it simply display oe blank popup instead of login form same issue for login also..... Click this URL to find the screen shot.... http://img827.imageshack.us/img827/921/loginformpopup.jpg -- Regards B.S.Bharanikumar http://php-mysql-jquery.blogspot.com/

1 0

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

support