support November 2005

support@drupal.org

72 participants
77 discussions

Uploaded files "falling out" of the system
by Anna 23 Nov '05

23 Nov '05

I have found that some, not all, of the files I upload, (eg: photo's, and files attached to blog entries) seem to simply vanish from the system. I can double check after posting that they are indeed present, and a few hours later they are gone. Watchdog reports no errors, the files simply vanish from the database. Any ideas? Thanks anna

13 20

tracking down errors
by dc 23 Nov '05

23 Nov '05

hiya - i keep getting the following errors displayed: * The path is already in use. * You have to specify a title. * You have to specify a title. is there a way to get more info and find out which pges these refer to? i have tried the url aliases and errror logs... also, while logged in i get this on every page: # The configuration options have been saved. # The configuration options have been saved. # The block configuration has been saved. # The block settings have been updated. is there a way to turn this off? Thanks, love Drupal!! /dc ------------------------------------------- David "DC" Collier mailto:dc@pikkle.com +81 (0)80 6521 9559 skype: callto://d3ntaku ------------------------------------------- Pikkle 株式会社 http://www.pikkle.com -------------------------------------------

1 0

Problem with Captcha Module . . .
by Jason Flatt 22 Nov '05

22 Nov '05

I posted this message to the Drupal forums a day and a half ago. I realize it hasn't been that long, but I thought I'd post it here as well, in case someone here has an answer and doesn't read the forums (like myself). I have installed the 4.6.0 version of the captcha module in the 4.6.3 version of Drupal. I have configured it as the instructions say. I'm only using it for the initial account registration, so I'm not dealing with the comment wierdness. The image shows up and is legible, but no matter what is entered in the text box, it always fails with the following message: "Please re-recognize the word shown in the image." At one point while testing, I clicked on the "Create new account" button without entering any text in the captcha box, and it accepted it and the account was created. So it always fails with any text entered in the captcha text box and passes with no text entered. I've been doing some searching on drupal.org and on the Internet in general, but I have not found anything that addresses this issue. Does anyone have any suggestions as to what might be wrong so I can fix this odd behavior? Additional note: In my troubleshooting, I've installed the CVS version of the Captcha module and patched it as directed by http://drupal.org/node/24556, and the behavior did not change. -- Jason Flatt jason(a)flattfamily.com Father of Five Sons: http://www.flattfamily.com/ (Joseph, 12; Cramer, 10; Travis, 8; Harry, 5; and waiting for William, -.25) Linux User: http://www.sourcemage.org/

1 0

looking for an agenda....
by Arturo 'Buanzo' Busleiman 20 Nov '05

20 Nov '05

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi! I'm looking for some drupal module or something that will help me to migrate a calendar from one site, that looks like this: http://www.rockpsodia.com.ar/index2.html (search for the word AGENDA, 2nd page of the site. it is a list of bands that are going to play live on different days of three different radio stations/categories). Any ideas? - -- Arturo "Buanzo" Busleiman - www.buanzo.com.ar Consultor en Seguridad Informatica / Dominio Digital TV - Da FOSS man! KTP Consultores - info AT ktpconsultores.com.ar Romper un sistema de seguridad los acerca tanto a ser hackers como el encender autos puenteando los convierte en ingenieros automotrices. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.1 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDgNE8AlpOsGhXcE0RAsnwAJ4/Rc4ldYCUK08xzjSateg4ziX80wCggzmI c1Z+LXvfJKIw3Xg9OoNTdjk= =zQ67 -----END PGP SIGNATURE-----

4 5

dependent profile fields?
by vrao 20 Nov '05

20 Nov '05

Hi, Is it possible to have profile fields depend on each other? (during user registration) i.e one 'select field' depends on the selection in another 'select field'. does any module do this? Thanks, V

2 3

Re: [support] Linefeed at top of all pages
by Kevin Severud 19 Nov '05

19 Nov '05

My search continues since I have neither the sitemap module nor the captcha module. Thanks for all the help so far. I've now disabled all modules that aren't required, changed themes, disabled clean urls, disabled the cache, and emptied the sessions table. Still no luck. What else is there? I'm stumped. I suppose it's time to download it all and run it on a debugger. -Kevin Katin Imes wrote: >> Bert Boerland hjad the same issue: >> please search on http://willy.boerland.com/myblog/ for the answers. >> > > To save folks some time: > <http://willy.boerland.com/myblog/node/6957> reports that the sitemap > module seems to be the culprit. When disabled, the extra LF's disappear. > > Cheers, > --Katin > > >

2 1

Re: [support] Linefeed at top of all pages
by Bèr Kessels 19 Nov '05

19 Nov '05

Bert Boerland hjad the same issue: please search on http://willy.boerland.com/myblog/ for the answers. Op zaterdag 19 november 2005 02:33, schreef Katin Imes: > Hi Kevin - > > I take it you have already switched themes to see if that changes > anything? > > >Something is inserting a linefeed at the top of all my pages. I doesn't > >appear to be a problem for html pages but this is fatal for RSS feeds. > >I read that someone experienced this with the captcha module but I don't > >have that module. Any suggestions on how to track this down (aside from > >disabling modules, which I've done a bit of already)? > > Cheers, > --Katin Bèr -- PGP ber(a)webschuur.com http://www.webschuur.com/sites/webschuur.com/files/ber_webschuur.asc PGP berkessels(a)gmx.net http://www.webschuur.com/sites/webschuur.com/files/ber_gmx.asc

2 1

Re: [support] Linefeed at top of all pages
by Kevin Severud 19 Nov '05

19 Nov '05

When I view the source of any node, be it a page, a story, a feed, etc I see that line one contains a linefeed and nothing else and then on line 2 begins the actual content. The site has been up for about 4 days (it's a recreation of a site that I started 6 weeks on another webhost) and this problem began within the last day. The theme has not changed and none of the mentioned variables are blank. Perhaps I need to delete the recently added modules and not just disable them.... Katin Imes wrote: > Ah, the next thing I'd look for then is empty site name, empty > primary links field, empty secondary links field, empty mission, > empty slogan, or blank logo in the site & themes configuration. > > Er, wait - do you mean there is an extra line feed at the top of each > page, or the top of each node displayed (each story, etc.)? Seems > like the top of each node would be the only thing that would affect > RSS... > > >> I did try different themes and am still seeing LF as the first line of >> output. >> >> Katin Imes wrote: >> >>> Hi Kevin - >>> >>> I take it you have already switched themes to see if that changes >>> anything? >>> >>> >>> >>>> Something is inserting a linefeed at the top of all my pages. I doesn't >>>> appear to be a problem for html pages but this is fatal for RSS feeds. >>>> I read that someone experienced this with the captcha module but I don't >>>> have that module. Any suggestions on how to track this down (aside from >>>> disabling modules, which I've done a bit of already)? >>>> >>>> >>> Cheers, >>> --Katin >>> >>> >>> >>> >> >>

2 1

Re: [support] Linefeed at top of all pages
by Kevin Severud 19 Nov '05

19 Nov '05

I did try different themes and am still seeing LF as the first line of output. Katin Imes wrote: > Hi Kevin - > > I take it you have already switched themes to see if that changes > anything? > > >> Something is inserting a linefeed at the top of all my pages. I doesn't >> appear to be a problem for html pages but this is fatal for RSS feeds. >> I read that someone experienced this with the captcha module but I don't >> have that module. Any suggestions on how to track this down (aside from >> disabling modules, which I've done a bit of already)? >> > > Cheers, > --Katin > > >

2 1

AD authentication
by Andy Morris 18 Nov '05

18 Nov '05

Okay, I am trying to get the ldap module to authenticate to AD. Can anyone provide me with a how to..I am not able to get the ldap module to work. Thanks, Andy The server is a RedHat Fedora Core 1 server. Windows 2003 DC.

1 0

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

support November 2005