support October 2012

support@drupal.org

59 participants
68 discussions

Problem getting a custom menu to display (D7)
by Ken Robinson 26 Oct '12

26 Oct '12

I have written a menu using a custom module. I can't get it to display on my test site. I used the menu example in the examples module as a guideline. My code can be seen at http://pastebin.com/VJiC5anM I've enabled the module and I know it's being executed, since I see the output of the dpm($items) call. I clear the cache every time I make a change to the code. Any help would be appreciated. Thanks in advance. Ken

3 5

My Drupal 7.15 just hacked :(
by lamp＠afan.net 26 Oct '12

26 Oct '12

Hi, My development website (Drupal 7.15) setup 2 weeks ago. Only View and Chaos Tools Suite Modules installed. I contacted hosting company and they said it's compromised through FTP -what I don't believe (if it's truth I'm really screwed because there is tons of other sites too :( ) I got "Security update" message but, since it's development website, I wasn't rushin' What's chances it's really FTP or something else? No other problems but "new" index page. Though, they could "planted" something? Suggestions? Thanks for any help, LAMP

3 3

ip address switch over
by Don 26 Oct '12

26 Oct '12

Hi, It doesn't look like the old ip address has been dropped yet. Can you do that now? Thanks. -Don Pickerel-

1 1

Landing page
by Waprothero＠gmail.com 25 Oct '12

25 Oct '12

I want to create a landing page, where I only gather user name and email, and show a description of my product. I am using Drupal 6. Is there a good module for this, or should I use another more general module? Thanks, Bill William Prothero http://es.earthednet.org

3 2

Using XSLT in Drupal
by Kim, Soonho (IFPRI) 23 Oct '12

23 Oct '12

Hi, I am trying to run the following code in Drupal to update local view theme. // get the iso3 code $ISO3 = $data->node_data_field_country_iso_code_field_country_iso_code_valu; // read the xslt file $themePath = path_to_theme(); $filePath = $themePath.'/xslt/GHI_en.xslt'; print $filePath; $xsl = new DOMDocument(); $xsl->load($filePath); $xslt = new XSLTProcessor(); $xslt->importStyleSheet($xsl); $xslt->setParameter( '', 'ISO3',$ISO3); $xml = new DOMDocument(); $xml->load('http:/data.ifpri.org/lod/ghi.rdf'); print (string) $xslt->transformToXML($xml); print $data->node_data_field_country_iso_code_field_country_iso_code_valu; However, I keep getting the error message saying : Fatal error: Class 'XSLTProcessor' not found in I installed php-xml and php-xslt extension. You can find my php info () here --> http://www.hyalina.com/country/SDN I also update the php.ini file to enable php-xslt and php-xml and restart the server. I guess that I did something wrong. Could you help me to find what step I was wrong? Thanks so much for your support! Best, Soonho From: support-bounces(a)drupal.org [mailto:support-bounces@drupal.org] On Behalf Of Jeff Greenberg Sent: Tuesday, October 23, 2012 8:48 AM To: support(a)drupal.org Subject: Re: [support] Trouble with block boxes You're right. It is not. Hmmm, is there a known issue of the conversion of isam->innodb losing autonum? On Tue, Oct 23, 2012 at 8:33 AM, Richard Damon <Richard(a)damon-family.org<mailto:Richard@damon-family.org>> wrote: The fields probably aren't defined as being an "auto-increment" field in the actual database schema. Auto-increment fields automatically assign 0 values to the next number in sequence. -- Richard Damon -- [ Drupal support list | http://lists.drupal.org/ ]

1 0

Trouble with block boxes
by Jeff Greenberg 23 Oct '12

23 Oct '12

Recently converted the d6 db to innodb tables on local, dev and qa platforms. My local box seems to have an issue that the other two do not, though it may have existed prior to the conversion. I hadn't manually created blocks before then, though the site does contain blocks that predate my involvement. When I add a block, the delta in the blocks table is 0, and the boxes bid is 0. This results in, I believe, the boxes entry not being found when I edit the block, as the title, body and settings are not present. Deleting the block works correctly, and if I manually change the delta to the highest delta for 'block' + 1, and set the bid in boxes to be the same, the issue is gone. Any thoughts on why I'm ending up with the 0 value? -- --- drupal.org/user/367108 linkedin.com/in/jeffrgreenberg accidentalcoder.com / ayendesigns.com @accidentalcoder

2 2

Clarification
by Selvaraj Chnnasamy 23 Oct '12

23 Oct '12

Dear All, I need to import product features (downloads) into Ubercart via the node import module. Regards Selvaraj.C

2 1

drush up
by Anthony 20 Oct '12

20 Oct '12

I ran *Drush UP* and get the following messages. Why does it complain about the images folder? Is this something related to GIT? *Code updates will be made to drupal core. WARNING: Updating core will discard any modifications made to Drupal core files , most noteworthy among these are .htaccess and robots.txt. If you have made an y modifications to these files, please back them up before updating so that you can re-create your modifications in the updated version of the file. Note: Updating core can potentially break your site. It is NOT recommended to up date production sites without prior testing. Do you really want to continue? (y/n): y rmdir(N://images/general): Permission denied filesystem.inc:143 [warning] Destination directory N:\/drupal-7.16 already exists. [error] Project drupal was updated successfully. Installed version is now 7.16. Backups were saved into the directory [ok] C:\Users\administrator/drush-backups/polamor1_drp3/20121019232429/drupal. Backups were restored successfully. [ok] rmdir(N://images/general): Permission denied filesystem.inc:143 [warning] *After this I looked at the status report and the core version is still 7.14. Why? ***Thanks for any help.** *-- *Anthony Stefan Maciejowski*

2 1

Term Reference Tree question
by Karsai Balázs 19 Oct '12

19 Oct '12

Hi, In Drupal 7 I'm working on a module that deals with node forms. I must set some values from code. Actually what I do is save some user input and populate the node form with the values. I can easily modify field values from*hook_form_alter*except term_reference_tree. It looks like that when hook_form_alter gets called, the term_reference_tree field /only has some meta data/and doesn't contain the checkboxes for the tree. They are missing in*hook_field_attach_form*too. However, when I check the field upon form submit, the checkboxes are there. On form submit the field has a key*[#options]*and an array with the checkbox tree, but these keys are missing in hook_form_alter. There's a function *term_reference_tree_process_checkbox_tree*which I tried to call from my module. It builds the frame of the checkbox tree, but not the actual checkboxes. Output is like this: |[#options_tree] => Array ( ) [#options] => Array ( ) [0] => Array ( [#type] => checkbox_tree_level [#max_choices] => 1 [#leaves_only] => [#start_minimized] => [#depth] => 1 [#level_start_minimized] => ) | As you can see, the *#options* array is empty, and the checkbox array only has some default values. I tried to simply insert values in the array (and set the keys where they should belong), set *#checked*to true like with regular checkboxes, but when the form is presented to the user, these values got overwritten with empty values. I also tried to modify weight, to put my module before term_reference_tree, but it didn't help. Is there a way to check some checkboxes from code*/before/*it the form gets displayed to the user? I am not too familiar with term reference tree module, but I think there must be some function I can call or another hook I can catch to build the checkbox tree so I can populate it. Thanks in advance, Balazs

2 3

Views filter against another field.
by Wipe_Out 19 Oct '12

19 Oct '12

Hi, Does anyone know how to filter a view by comparing the value of two fields?? Longer description - I have a content type that has 3 date fields.. I want a view that shows all the content where the values in date_field_1 are different from the values in date_field_2.. I can only seem to filter based on set static vales or with date fields using strtotime expressions.. I can't see any way to do a comparison of two fields.. Thanks..

2 2

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

support October 2012