July 2005 - Development - lists.drupal.org

[drupal-devel] [task] Extend db_query()
by killes 27 Jul '05

27 Jul '05

Issue status update for http://drupal.org/node/17656 Post a follow up: http://drupal.org/project/comments/add/17656 Project: Drupal Version: cvs Component: database system Category: tasks Priority: normal Assigned to: killes(a)www.drop.org Reported by: killes(a)www.drop.org Updated by: killes(a)www.drop.org Status: patch Attachment: http://drupal.org/files/issues/node-a.patch (1.8 KB) the last patch wasn't good. killes(a)www.drop.org Previous comments: ------------------------------------------------------------------------ Mon, 21 Feb 2005 12:48:30 +0000 : killes(a)www.drop.org Attachment: http://drupal.org/files/issues/db-query.patch (2.16 KB) We should make our database abstraction layer more robust and ensure that module authors can use it without string manipulations inside the query. Several queries use implode() to get their arguments into the query. This is undesirable as we rely on the module author to check the keys and values of such arrays for exploitation attempts. I have created the attached patch which shouldbe able to allow us to not use implode anymore. A minor problem is that all inserted values will be treated as strings. This might be a problem with PostgreSQL at least. However, the same strategy is already used in Drupal core without any complaints I know of. Summary: This patch will alow us to simplify some code in node.module, user.module, taxonomy.module and probably others. ------------------------------------------------------------------------ Mon, 21 Feb 2005 17:03:58 +0000 : killes(a)www.drop.org It's a patch. ------------------------------------------------------------------------ Mon, 21 Feb 2005 17:19:13 +0000 : killes(a)www.drop.org Attachment: http://drupal.org/files/issues/db-query_0.patch (2.07 KB) Squeezed out two lines of code after consultation with Karoly. Adds only 10 loc (plus some docs). ------------------------------------------------------------------------ Mon, 21 Feb 2005 17:23:08 +0000 : chx Do I need to say +1? ------------------------------------------------------------------------ Thu, 03 Mar 2005 00:15:10 +0000 : killes(a)www.drop.org Attachment: http://drupal.org/files/issues/db-query_1.patch (2.69 KB) After some discussion with Adrian at Drupal Con we found out that we do not know why node_save currently works with pgsql. It currently assumes that all db columns are strings. It seems to work but we should not rely on it. Here is a patch that checks for the type of field that is inserted. It needs testing. ------------------------------------------------------------------------ Tue, 26 Jul 2005 01:17:04 +0000 : drumm +1 for making this into an API. I've seen too many hacked together query builders in Drupal and Contrib. I have not tested. ------------------------------------------------------------------------ Wed, 27 Jul 2005 11:30:29 +0000 : Bèr Kessels untested. a big +1 for the feature ------------------------------------------------------------------------ Wed, 27 Jul 2005 11:41:52 +0000 : killes(a)www.drop.org the patch still applies. the new patch here updates node_save to use it. Untested. ------------------------------------------------------------------------ Wed, 27 Jul 2005 11:42:24 +0000 : killes(a)www.drop.org Attachment: http://drupal.org/files/issues/node-%a.patch (926 bytes) the patch still applies. the new patch here updates node_save to use it. Untested. ------------------------------------------------------------------------ Wed, 27 Jul 2005 11:45:17 +0000 : Cvbge "After some discussion with Adrian at Drupal Con we found out that we do not know why node_save currently works with pgsql. " Well, it does not work. Real life exampless of not-working include flexinode (my experience) and forum module (as someone reported). Probably also others. The bug occurs when a normal user (but with necessarily rights) adds a node and he has no controls (the 'moderated', 'sticky', 'published' etc). The, in node_load() $node->sticky, $node->moderated (and maybe others) are set to FALSE (or TRUE, but in this case it works). When doing printf("%s", FALSE) the FALSE is change to empty string. The sticky and moderated db fields are numeric and postgresql do not accept '' (empty string) as a value of integer type. The result is for example such error: warning: pg_query(): Query failed: ERROR: invalid input syntax for integer: "" in ..../includes/database.pgsql.inc on line 45. user error: query: INSERT INTO node (title, uid, type, teaser, status, moderate, promote, sticky, body, comment, created, changed, nid) VALUES('xx', '2', 'flexinode-1', '<div class="flexinode-body flexinode-1"><div class="flexinode-image-3"><div class="form-item"> <label>Zdjęcie:</label><br /> <img alt="xx" src="..../pliki/" /><br />Get original file (28KB) [1] </div> </div></div>', '1', '', '1', '', '<div class="flexinode-body flexinode-1"><div class="flexinode-image-3"><div class="form-item"> <label>Zdjęcie:</label><br /> <img alt="xx" src="..../pliki/" /><br />Get original file (28KB) [2] </div> < in ..../includes/database.pgsql.inc on line 62. [1] http://drupal.org/..../pliki//tmp/male.jpg [2] http://drupal.org/..../pliki//tmp/male.jpg ------------------------------------------------------------------------ Wed, 27 Jul 2005 13:03:14 +0000 : Cvbge Attachment: http://drupal.org/files/issues/node.module_5.diff (500 bytes) Here's a quick fix for 4.6

1 0

[drupal-devel] [task] Extend db_query()
by Cvbge 27 Jul '05

27 Jul '05

Issue status update for http://drupal.org/node/17656 Post a follow up: http://drupal.org/project/comments/add/17656 Project: Drupal Version: cvs Component: database system Category: tasks Priority: normal Assigned to: killes(a)www.drop.org Reported by: killes(a)www.drop.org Updated by: Cvbge Status: patch Attachment: http://drupal.org/files/issues/node.module_5.diff (500 bytes) Here's a quick fix for 4.6 Cvbge Previous comments: ------------------------------------------------------------------------ Mon, 21 Feb 2005 12:48:30 +0000 : killes(a)www.drop.org Attachment: http://drupal.org/files/issues/db-query.patch (2.16 KB) We should make our database abstraction layer more robust and ensure that module authors can use it without string manipulations inside the query. Several queries use implode() to get their arguments into the query. This is undesirable as we rely on the module author to check the keys and values of such arrays for exploitation attempts. I have created the attached patch which shouldbe able to allow us to not use implode anymore. A minor problem is that all inserted values will be treated as strings. This might be a problem with PostgreSQL at least. However, the same strategy is already used in Drupal core without any complaints I know of. Summary: This patch will alow us to simplify some code in node.module, user.module, taxonomy.module and probably others. ------------------------------------------------------------------------ Mon, 21 Feb 2005 17:03:58 +0000 : killes(a)www.drop.org It's a patch. ------------------------------------------------------------------------ Mon, 21 Feb 2005 17:19:13 +0000 : killes(a)www.drop.org Attachment: http://drupal.org/files/issues/db-query_0.patch (2.07 KB) Squeezed out two lines of code after consultation with Karoly. Adds only 10 loc (plus some docs). ------------------------------------------------------------------------ Mon, 21 Feb 2005 17:23:08 +0000 : chx Do I need to say +1? ------------------------------------------------------------------------ Thu, 03 Mar 2005 00:15:10 +0000 : killes(a)www.drop.org Attachment: http://drupal.org/files/issues/db-query_1.patch (2.69 KB) After some discussion with Adrian at Drupal Con we found out that we do not know why node_save currently works with pgsql. It currently assumes that all db columns are strings. It seems to work but we should not rely on it. Here is a patch that checks for the type of field that is inserted. It needs testing. ------------------------------------------------------------------------ Tue, 26 Jul 2005 01:17:04 +0000 : drumm +1 for making this into an API. I've seen too many hacked together query builders in Drupal and Contrib. I have not tested. ------------------------------------------------------------------------ Wed, 27 Jul 2005 11:30:29 +0000 : Bèr Kessels untested. a big +1 for the feature ------------------------------------------------------------------------ Wed, 27 Jul 2005 11:41:52 +0000 : killes(a)www.drop.org the patch still applies. the new patch here updates node_save to use it. Untested. ------------------------------------------------------------------------ Wed, 27 Jul 2005 11:42:24 +0000 : killes(a)www.drop.org Attachment: http://drupal.org/files/issues/node-%a.patch (926 bytes) the patch still applies. the new patch here updates node_save to use it. Untested. ------------------------------------------------------------------------ Wed, 27 Jul 2005 11:45:17 +0000 : Cvbge "After some discussion with Adrian at Drupal Con we found out that we do not know why node_save currently works with pgsql. " Well, it does not work. Real life exampless of not-working include flexinode (my experience) and forum module (as someone reported). Probably also others. The bug occurs when a normal user (but with necessarily rights) adds a node and he has no controls (the 'moderated', 'sticky', 'published' etc). The, in node_load() $node->sticky, $node->moderated (and maybe others) are set to FALSE (or TRUE, but in this case it works). When doing printf("%s", FALSE) the FALSE is change to empty string. The sticky and moderated db fields are numeric and postgresql do not accept '' (empty string) as a value of integer type. The result is for example such error: warning: pg_query(): Query failed: ERROR: invalid input syntax for integer: "" in ..../includes/database.pgsql.inc on line 45. user error: query: INSERT INTO node (title, uid, type, teaser, status, moderate, promote, sticky, body, comment, created, changed, nid) VALUES('xx', '2', 'flexinode-1', '<div class="flexinode-body flexinode-1"><div class="flexinode-image-3"><div class="form-item"> <label>Zdjęcie:</label><br /> <img alt="xx" src="..../pliki/" /><br />Get original file (28KB) [1] </div> </div></div>', '1', '', '1', '', '<div class="flexinode-body flexinode-1"><div class="flexinode-image-3"><div class="form-item"> <label>Zdjęcie:</label><br /> <img alt="xx" src="..../pliki/" /><br />Get original file (28KB) [2] </div> < in ..../includes/database.pgsql.inc on line 62. [1] http://drupal.org/..../pliki//tmp/male.jpg [2] http://drupal.org/..../pliki//tmp/male.jpg

1 0

[drupal-devel] [feature] Allow node modules to override taxonomy listing
by Eric Scouten 27 Jul '05

27 Jul '05

Issue status update for http://drupal.org/node/27418 Post a follow up: http://drupal.org/project/comments/add/27418 Project: Drupal Version: cvs Component: taxonomy.module Category: feature requests Priority: normal Assigned to: Eric Scouten Reported by: Eric Scouten Updated by: Eric Scouten Status: patch Attachment: http://drupal.org/files/issues/taxonomy_render_nodes_hook.patch (605 bytes) Attached patch provides a hook that node modules can use to override the behavior of taxonomy_render_nodes() when displaying terms from a single vocabulary that applies to only one node type. (i.e. a vocabulary that applies to images only could be rendered with a gallery page instead of the standard node teaser formatting.) Eric Scouten

2 3

[drupal-devel] [feature] add inline functionaliy to uploads
by Kobus 27 Jul '05

27 Jul '05

Issue status update for http://drupal.org/node/26288 Post a follow up: http://drupal.org/project/comments/add/26288 Project: Drupal Version: cvs Component: upload.module Category: feature requests Priority: normal Assigned to: Anonymous Reported by: Bèr Kessels Updated by: Kobus Status: patch Ber: Great, then I +1 it. From our previous talks about this, it seemed as if this functionality was being taken away. Kobus Previous comments: ------------------------------------------------------------------------ Sun, 03 Jul 2005 18:03:35 +0000 : Bèr Kessels Attachment: http://drupal.org/files/issues/upload_inline.patch (19.05 KB) One of the most often asked features is proper inlnie handling of files. Look at the amount of solutions, the popularity of image_assist, and the amount of peolpe dowloading image.module! That alone should be enough proof that Drupal lacks proper inline image support. This patch adds that to core. In fact, it does little more then appending a link of img tag to the body or the teaser. Off course that is configurable per file. Next to the [] list checkbox, this patch adds an [] inline checkbox. Simplicity is the foundation of this patch. I want no stles for inline editing, no fancy html wrappers, no tokens, just $node->body or teaser appended with a small html string. Another small themable funtion is introduced, (hey, you cannot expect me to develop something without adding more power for themers, now, can you? ;) ), that allows people to theme the string that is appended to the body or the teaser. Oh, and also note hat the biggest part of this patch is some cleaning I had to do in order to be able to develop properly. I dont like Ifs inside cases in foreaches inside swiches. in other words: nodeapi now calls functions instead of executing code directly. ------------------------------------------------------------------------ Sun, 03 Jul 2005 18:19:25 +0000 : Bèr Kessels Attachment: http://drupal.org/files/issues/inline.patch.screenshot.png (26.68 KB) here is how the form now looks ------------------------------------------------------------------------ Sun, 03 Jul 2005 18:19:58 +0000 : Bèr Kessels Attachment: http://drupal.org/files/issues/inline.patch.screenshot3.png (30.53 KB) and this is an example of inlined images and a .doc file. ------------------------------------------------------------------------ Sun, 03 Jul 2005 20:44:00 +0000 : sepeck changing to patch per request from berkes ------------------------------------------------------------------------ Tue, 05 Jul 2005 07:46:13 +0000 : Kobus This gets a +1 from me in principle, however, the [inline:xx] tag with inline.module gives you greater freedom as to where the inline image must be displayed. If you can add this functionality (I haven't checked the code, I don't know if it is in there) it would be a great addition for Core. This same strategy can be used for inline blocks, I am sure. Regards, Kobus ------------------------------------------------------------------------ Tue, 05 Jul 2005 08:57:50 +0000 : Bèr Kessels there are a couple of reasons why i did not include the [inline] tags. * I aimed for extreme simplicity: a checkbox shows an image inline: its up to the theme where it appears (if one does not like it before/above the body and teaser.). Simplicity was the main goal. * We don't have any tokens in core. And we should not have them. * Tokens are a very bad substitute for a good interface. They give less power then plain HTLM. Are much worst documented then HTML, but in the mean time, they are still as hard to learn as HTML. (Yes, I know people _think_ they are easier, but there _is_ not difference between [ ] and , only that its a different ascii char. So, no. I don't allow any placement of the image. I leave that that for dedicated modules, or the themer to decide. ------------------------------------------------------------------------ Tue, 05 Jul 2005 09:34:06 +0000 : Kobus So you will provide an API to do this? For example, with perhaps minor modifications, the inline.module will be able to display these files? In that case I am happy. If not, then I can't give my support to this patch (as if that matters...). A themer can't do this task as inline images (and blocks for that matter) is too dynamic for theming; it can be placed anywhere in a node where the user pleases. This means for me that there should be a module for this, such as inline module that allows you to define [inline:xx] tags. If your module emits an array of uploaded files (such as upload.module), inline.module can be, with minor changes, adapted to show these files inline. To show you what I mean with the content is too dynamic for a themer to perform this task, look at this screenshot related to inline blocks (inline images can follow the same pattern): http://drupal.org/files/issues/regions---possibility-3.png ------------------------------------------------------------------------ Tue, 05 Jul 2005 11:26:15 +0000 : Bèr Kessels Kobus, We are dealing with different issues here: You want a method to place images, files or so anywhere in the post. That is fine, but certainly NOT addressed in the patch! I made patch that *only* adds marked files to the body. its really nothing more then <?php $node->body = $filestring . $node->body ?> No APIS, no, dynamic tokens, no filters, nothing. However, what I meant with themers, is that there now is a theme_upload_inline available, so you can theme the abovementioned $filestring. On top of that $node->files[FILEID]->inline is TRUE if a file is flagged for inline. So in node.tpl.php, or wherever you want to theme a node, you can print nice images inline, when that flag is set. And about the comment that a themer cant do this: Simply not true. On most sites images are always placed in the same places. REally, even the sites see which use img_assist or inline, use them to place the images on the exact same places in every node. People /think/ they want the power to place images anywhere, but they hardly ever use that power. Just look at all the big news/publishing sites out there (BBC, CNN, BoigBoing, r even freshmeat) images are all placed acc. to the theme. They are not placed in random places by authors. So if you are one of the few that still want that power, there aer mots of power tools like inline module or img_assist. We should offer a good default, one that is simple. ------------------------------------------------------------------------ Tue, 05 Jul 2005 11:41:34 +0000 : Gerhard Killesreiter I fully agree that tags are evil. Kobus: You can always look for tags in $node->body in your theme's node function. ------------------------------------------------------------------------ Tue, 05 Jul 2005 11:50:52 +0000 : stefan nagtegaal Ber, the theme-function in your code looks like: <?php +/** + * Theme function for rendering of inline images + * @param $file a file object. + * @param $image a Boolean, indicating whether an img tag (TRUE) or an anchor tag (FALSE) should be used. + * @ingroup themable + */ +function theme_upload_inline($file, $image) { + if ($image) { + return '<img src="'. check_url(($file->fid ? file_create_url($file->filepath) : url(file_create_filename($file->filename, file_create_path())))) .'" alt="'. check_plain($file->filename) .'" class="upload inline">'; + } + else { + return ''. check_plain($file->filename) .' [1]'; + } + +} ?> After looking at your code it's not clear to me when $image is TRUE or FALSE, can you elaborate on me please? [1] http://drupal.org/'. check_url(($file->fid ? file_create_url($file->filepath) : url(file_create_filename($file->filename, file_create_path())))) .'\" class=\"upload inline ------------------------------------------------------------------------ Tue, 05 Jul 2005 12:06:39 +0000 : Bèr Kessels The function calling the theme function should decide whether its an image. IMO that is far too hardcore code for a themer ;) <?php $image = ereg('^(image/)', $file->filemime); ?> inside _upload_inline() does the trick. I did find one issue, though, with svgs, which are image/svg so maybe we should limit this to really only inline jpg, png, and gif, by extension? But I am no fan of determining files by extension, and IMO getimgsize is too heavy; ------------------------------------------------------------------------ Tue, 05 Jul 2005 12:13:52 +0000 : stefan nagtegaal Can't you make use of PHP's <?php image_type_to_mime_type(); ?> or <?php image_type_to_extension(); ?> ------------------------------------------------------------------------ Tue, 05 Jul 2005 12:45:43 +0000 : Kobus Well, if not in the patch, I need inline functionality one way or another. inline.module works perfectly with the current upload.module to fulfill my needs, and if there is a way where someone can extend your proposed upload.module, that would get my +1, otherwise I will just remain neutral about this issue. inline.module makes use of $node->files and displays that image. If your patch still uses $node->files, then this is a non-issue. In other words, if I can, with inline.module, or with minor modifications to inline.module still show files inline, I am +1 for this. As for the themability question... I still disagree. You say "Simply not true. On most sites images are always placed in the same places." That is ONLY true because they have NO alternatives. Means the content is in the same places, because they have no other places to put them. I have made tens of static sites where the content does not resemble a fixed pattern or structure. For me, free-flow layout is my expression of my creativity. This is why I still even BOTHER with static sites; when Drupal don't do what I want it to do. If Drupal could do inline display of content properly, I'd never even build another static site. It is a great mistake people make (including myself), and that is they design the site before ANY content is available, and this happens a lot in static sites. But in dynamic sites, you have far less control over this, unless you have a VERY clean structure with limited information that can be added, and only a few people posting content. If you can have your content before you start the design, you will have a better fit. I can't see how you can anticipate every possible posting posted on your site if you have a diversity of users. Especially not if you're using a site such as an designer's showcase site where your creativity is shown by your web sites. Possible, but not easy. If I claim that I have "unique, fresh designs" I can certainly NOT give them a "box-like" site with "left and right side bars only". That's why I need inline content, this includes images AND boxes. Gerhard: Your concern about tags is answered as well above, if I am not mistaken. The patch need not provide the tags, but should provide for someone to develop a module that provide the filters or tags. To summarize: I don't need your patch to do the inline images. I just need your patch to be able to allow someone else to develop a module that can display inline files. Kobus ------------------------------------------------------------------------ Mon, 18 Jul 2005 09:56:38 +0000 : Bèr Kessels okay, so for all clarity, let me sumarise: * this patch introduces a chackbox "inline". If checked, the file will show up inline. IT will be appended to the teaser and the body. * this patch does *not* allow one to place images of files in a userdefined place in the body. * this patch does *not* do any resizing nor any thumbnailing. * This patch is meant to be simple, clear and transparant. No tokens, no javascript, no nothing. ------------------------------------------------------------------------ Mon, 18 Jul 2005 11:21:54 +0000 : Kobus Then I can't see how this patch could replace the existing upload.module, which allows you to use inline.module to place images inline. I therefore withdraw my +1 and go -1 on this (not that it matters, I believe). I think you didn't properly read my previous message. I said I don't need your patch to do all this, but I can't live without the functionality currently provided by the upload.module and inline.module combination. I agree that your patch don't need to have that functionality, but if your patch takes away this functionality, in other words, I can't (by hook or by crook) manage what I need to do, my vote is -1. Regards, Kobus ------------------------------------------------------------------------ Mon, 18 Jul 2005 19:58:34 +0000 : Bèr Kessels Kobus, And all the others looking fofr advanced inline systems: please do not -1 this. It will hep inline module a lot too. allthough not yet in this patch, but can you imagine a perission system for inline module, that comes for free? Or a core system, that makes inline module ten times smaller? it is this path! so, please, if it is not /exactly/ what you are looking for, at least look at the advantages for Joe Average, and even for the possibilties for your favorite inline-module. even imag_assist will gain an anomous usability impcact when usiong this module, for it can then finally use the upload module in full scale. Ber ------------------------------------------------------------------------ Sat, 23 Jul 2005 18:59:10 +0000 : Bèr Kessels Sohodjo jim: " I hope it matters. A big -1 on enforcing over-simplification at the expense of important and existing functionality. If automatic, uncontrollable placement of images becomes the standard, it will mean fewer not more image-rich Drupal sites as site owners/developers get complaints about "Why can't I control my images!" I _strongly_ encourage Ber to provide a "have it both ways" solution. Why not have an admin configuration setting for "allow inline tags" with default off. Change it to on and you get an additional upload checkbox for 'inline at tag' to accommodate the current functionality of the inline module while simultaneously allowing for default placement. " NOOO. people; please; look at the PATCH. Again: and hopefully last time: Simplicity. This patch does NOT replace ANYTHING inline module or img_assist wants to do. This patch hands better data to such modules. It hands a variable over to these modules, $node->file[FID]->inline, which tells these sorts of modules if people wnat that file to appear inline. AND it CAN (by default will) render a file in the most simple way inline. So really, if you want to -1 this patch, fine. But do not -1 it, because it does too little IYO. It still allows MUCH more than what you can do no, without that patch! And any solution, for core, that allows advanced handling of inline images will either require an enourmous amount of work, or it will simply no get in. So, unless you come up with a good core-worthy patch, this is still a big leap forward from what we have now. ------------------------------------------------------------------------ Sat, 23 Jul 2005 19:01:51 +0000 : Bèr Kessels :$ this is an attempt to fix the borken HML in the previous follow up. ------------------------------------------------------------------------ Sun, 24 Jul 2005 04:07:34 +0000 : TDobes Please don't combine unrelated changes together in the same patch. Moving stuff in/out of the _nodeapi hook has absolutely nothing to do with the patch and makes it much harder to read through the patch and see what it's actually doing. I'd appreciate it if you could separate the changes made here which are really relevant and move the other changes into another issue. Also: You change form_group_collapsible(t('File attachments') to form_group_collapsible(t('File Attachments'). A quick glance at some other core code seems to indicate that we've standardized on capitalizing only the first word in multi-word group titles. As for the functionality itself, I don't think this belongs in upload.module. It would be useful to have the functionality in core, but as a separate module which can be switched on and off. (upload_inline.module or something like that) If a site were set up using an inlining system from contrib and the functionality you're proposing could not be switched off, it would be extremely confusing to users that there are two different ways of inlining images. A minor comment: I'm not so sure whether the results of this patch, when inlining non-image attachments, will be the one users expect. A non-web-savvy person may expect his/her Word document (for instance) to appear inline with the node when they click "inline" -- just like their images do. I'd suggest that we limit inlining to images only. I'm not as adamant about this as the other issues, so I could be convinced otherwise if others disagree. ------------------------------------------------------------------------ Sun, 24 Jul 2005 07:58:19 +0000 : Bèr Kessels Thank you for your thoughts Tdobbes. As for the "moving things in and out of nodeapi" This was necessary, because otherwise the patch would have made the code even more unreadable. I agree with you on this point, but I simply had to clean it up a little, in order to be able to work in it. As it stands now, it is simply not possible to make this a separate module. We cannot hook into the files table. In a next stage, I might work out some hook for that table. But first things first. Can Dries or Steven please comment on his. I want to know If i should bother spending this enormous amount of time on commenting and debating this issue. If the chances are small this is accepted, Ill just drop it This ridiculous long thread reminds me again why I try to avoid making patches for core. ------------------------------------------------------------------------ Mon, 25 Jul 2005 05:49:37 +0000 : Steven Overall I like the concept, but I think it at least needs some default styling to make the image appear okay, like floating it. Right now it appears inline between whatever was there... very ugly. Sure you can say "leave it up to the themer" but if the goal is to provide a simple default, we can't expect people to dive into theming if they are going to use this feature instead of img_assist or whatever. Also, I wonder about the classes "upload" and "image". Is there a reason to use two classes? Isn't "image" a bit too generic? Oh and there is a missing XHTML / for the img tag. ------------------------------------------------------------------------ Mon, 25 Jul 2005 12:42:26 +0000 : Bèr Kessels I will fix the broken Xhttml. I chose "image" because it is exactly the same as the .image class used by image.module. But I will see to it, to add more functionality. I agree that it is not up to the themer for some good defaults, thus I will add a line of CSS to drupal.css (*shiver* ;) ) upload, IMO does not communicate well enough what the Image is doing. Not sure yet how I ill fix this, but I will see to it to come up with a better CSS/theme solution. Thanks! ------------------------------------------------------------------------ Tue, 26 Jul 2005 14:18:23 +0000 : Bèr Kessels Attachment: http://drupal.org/files/issues/upload_inline_0.patch (12.24 KB) Suggestions by Steven are now included. I very simple float is added to the inline images in drupal.css. XHTML fixed. And I cleaned up some old crufty comments, as suggested by Dries. ------------------------------------------------------------------------ Tue, 26 Jul 2005 17:05:45 +0000 : fax8 What is proposed here is a good idea. But I think that this is done in not good way. I think that upload.module should be only a layer between file system and modules. So modify upload module to add a specific feature like your inline for me is not good. but I like the idea to add checkboxes for enable interaction modules between modules and upload.module. Maybe we could design an of api wich let modules tell upload.module that they can interact with it. I make an example: I'm a developer of video.module. Now to add a video file to video.module one need to put the file into drupal folders using ftp and then insert the path to the file during node creation. One of the features our users are asking a lot is the possibility to directly upload a video file to dupal. So I should write a lot of code, settings, security buggy code.. that for me isn't useful. What about if only calling an upload.module api I should enable a new checkbox on upload form called "use as video file" which let me use the file as a video file on my module??? What do you think about it???? ------------------------------------------------------------------------ Tue, 26 Jul 2005 20:00:03 +0000 : Bèr Kessels fax: upload /is/ such a layer. Just look at how image module does it. You need not write any additional 'buggy' code, you can use all teh upload functionality. The upload interface (the table and list), however, is tightly integrated, so that drupal offers an out-of-the-box file system. Nox, my patch simply adds an "out of the box" inline functionality. Small and simple. For any more advanced file features you should use or write a module that, in turn, uses the uplaod.module. ------------------------------------------------------------------------ Wed, 27 Jul 2005 11:22:40 +0000 : stefan nagtegaal After discussing with Ber, I think this patch has some great potential though the simplicity of it.. For the people who don't completely agree what this patch does: - It adds an extra checkbox for each attachment. If the 'Inline' checkbox is checked, images are displayed inline in your post and other attachments (like .pdf, .ppt, or whatever) were transformed into links. The potential of this patch is in the fact that this makes it much, much easier to have another contrib module which makes it possible to let you choose at the node submission how you would like your node to be displayed, incl. the selected inline attachments to be displayed (using _nodeapi()). So, a big +1 from me on this.. ------------------------------------------------------------------------ Wed, 27 Jul 2005 11:27:52 +0000 : Kobus > - It adds an extra checkbox for each attachment. If the 'Inline' > checkbox is checked, images are displayed inline in your post and other > attachments (like .pdf, .ppt, or whatever) were transformed into links. Does this mean it is done automatically or do I have control over this? I don't want the images to be inline if I can't control where I put it. Let me just clarify my position on this short-and-sweet-like: If it breaks the existing functionality that upload.module + inline.module provides without opening the door for a replacement, then I am -1, otherwise +1. :-) Kobus ------------------------------------------------------------------------ Wed, 27 Jul 2005 11:51:50 +0000 : Bèr Kessels Kobus: Again: it does not break anything! It opens up enormous potential for modules such as inline/module. Because inline module now has access to a variable $node->files[fid]->inline. in other words: modules such as inline.module can now find out what images a user wants to see inline!

1 0

[drupal-devel] [feature] add inline functionaliy to uploads
by Bèr Kessels 27 Jul '05

27 Jul '05

Issue status update for http://drupal.org/node/26288 Post a follow up: http://drupal.org/project/comments/add/26288 Project: Drupal Version: cvs Component: upload.module Category: feature requests Priority: normal Assigned to: Anonymous Reported by: Bèr Kessels Updated by: Bèr Kessels Status: patch Kobus: Again: it does not break anything! It opens up enormous potential for modules such as inline/module. Because inline module now has access to a variable $node->files[fid]->inline. in other words: modules such as inline.module can now find out what images a user wants to see inline! Bèr Kessels Previous comments: ------------------------------------------------------------------------ Sun, 03 Jul 2005 18:03:35 +0000 : Bèr Kessels Attachment: http://drupal.org/files/issues/upload_inline.patch (19.05 KB) One of the most often asked features is proper inlnie handling of files. Look at the amount of solutions, the popularity of image_assist, and the amount of peolpe dowloading image.module! That alone should be enough proof that Drupal lacks proper inline image support. This patch adds that to core. In fact, it does little more then appending a link of img tag to the body or the teaser. Off course that is configurable per file. Next to the [] list checkbox, this patch adds an [] inline checkbox. Simplicity is the foundation of this patch. I want no stles for inline editing, no fancy html wrappers, no tokens, just $node->body or teaser appended with a small html string. Another small themable funtion is introduced, (hey, you cannot expect me to develop something without adding more power for themers, now, can you? ;) ), that allows people to theme the string that is appended to the body or the teaser. Oh, and also note hat the biggest part of this patch is some cleaning I had to do in order to be able to develop properly. I dont like Ifs inside cases in foreaches inside swiches. in other words: nodeapi now calls functions instead of executing code directly. ------------------------------------------------------------------------ Sun, 03 Jul 2005 18:19:25 +0000 : Bèr Kessels Attachment: http://drupal.org/files/issues/inline.patch.screenshot.png (26.68 KB) here is how the form now looks ------------------------------------------------------------------------ Sun, 03 Jul 2005 18:19:58 +0000 : Bèr Kessels Attachment: http://drupal.org/files/issues/inline.patch.screenshot3.png (30.53 KB) and this is an example of inlined images and a .doc file. ------------------------------------------------------------------------ Sun, 03 Jul 2005 20:44:00 +0000 : sepeck changing to patch per request from berkes ------------------------------------------------------------------------ Tue, 05 Jul 2005 07:46:13 +0000 : Kobus This gets a +1 from me in principle, however, the [inline:xx] tag with inline.module gives you greater freedom as to where the inline image must be displayed. If you can add this functionality (I haven't checked the code, I don't know if it is in there) it would be a great addition for Core. This same strategy can be used for inline blocks, I am sure. Regards, Kobus ------------------------------------------------------------------------ Tue, 05 Jul 2005 08:57:50 +0000 : Bèr Kessels there are a couple of reasons why i did not include the [inline] tags. * I aimed for extreme simplicity: a checkbox shows an image inline: its up to the theme where it appears (if one does not like it before/above the body and teaser.). Simplicity was the main goal. * We don't have any tokens in core. And we should not have them. * Tokens are a very bad substitute for a good interface. They give less power then plain HTLM. Are much worst documented then HTML, but in the mean time, they are still as hard to learn as HTML. (Yes, I know people _think_ they are easier, but there _is_ not difference between [ ] and , only that its a different ascii char. So, no. I don't allow any placement of the image. I leave that that for dedicated modules, or the themer to decide. ------------------------------------------------------------------------ Tue, 05 Jul 2005 09:34:06 +0000 : Kobus So you will provide an API to do this? For example, with perhaps minor modifications, the inline.module will be able to display these files? In that case I am happy. If not, then I can't give my support to this patch (as if that matters...). A themer can't do this task as inline images (and blocks for that matter) is too dynamic for theming; it can be placed anywhere in a node where the user pleases. This means for me that there should be a module for this, such as inline module that allows you to define [inline:xx] tags. If your module emits an array of uploaded files (such as upload.module), inline.module can be, with minor changes, adapted to show these files inline. To show you what I mean with the content is too dynamic for a themer to perform this task, look at this screenshot related to inline blocks (inline images can follow the same pattern): http://drupal.org/files/issues/regions---possibility-3.png ------------------------------------------------------------------------ Tue, 05 Jul 2005 11:26:15 +0000 : Bèr Kessels Kobus, We are dealing with different issues here: You want a method to place images, files or so anywhere in the post. That is fine, but certainly NOT addressed in the patch! I made patch that *only* adds marked files to the body. its really nothing more then <?php $node->body = $filestring . $node->body ?> No APIS, no, dynamic tokens, no filters, nothing. However, what I meant with themers, is that there now is a theme_upload_inline available, so you can theme the abovementioned $filestring. On top of that $node->files[FILEID]->inline is TRUE if a file is flagged for inline. So in node.tpl.php, or wherever you want to theme a node, you can print nice images inline, when that flag is set. And about the comment that a themer cant do this: Simply not true. On most sites images are always placed in the same places. REally, even the sites see which use img_assist or inline, use them to place the images on the exact same places in every node. People /think/ they want the power to place images anywhere, but they hardly ever use that power. Just look at all the big news/publishing sites out there (BBC, CNN, BoigBoing, r even freshmeat) images are all placed acc. to the theme. They are not placed in random places by authors. So if you are one of the few that still want that power, there aer mots of power tools like inline module or img_assist. We should offer a good default, one that is simple. ------------------------------------------------------------------------ Tue, 05 Jul 2005 11:41:34 +0000 : Gerhard Killesreiter I fully agree that tags are evil. Kobus: You can always look for tags in $node->body in your theme's node function. ------------------------------------------------------------------------ Tue, 05 Jul 2005 11:50:52 +0000 : stefan nagtegaal Ber, the theme-function in your code looks like: <?php +/** + * Theme function for rendering of inline images + * @param $file a file object. + * @param $image a Boolean, indicating whether an img tag (TRUE) or an anchor tag (FALSE) should be used. + * @ingroup themable + */ +function theme_upload_inline($file, $image) { + if ($image) { + return '<img src="'. check_url(($file->fid ? file_create_url($file->filepath) : url(file_create_filename($file->filename, file_create_path())))) .'" alt="'. check_plain($file->filename) .'" class="upload inline">'; + } + else { + return ''. check_plain($file->filename) .' [1]'; + } + +} ?> After looking at your code it's not clear to me when $image is TRUE or FALSE, can you elaborate on me please? [1] http://drupal.org/'. check_url(($file->fid ? file_create_url($file->filepath) : url(file_create_filename($file->filename, file_create_path())))) .'\" class=\"upload inline ------------------------------------------------------------------------ Tue, 05 Jul 2005 12:06:39 +0000 : Bèr Kessels The function calling the theme function should decide whether its an image. IMO that is far too hardcore code for a themer ;) <?php $image = ereg('^(image/)', $file->filemime); ?> inside _upload_inline() does the trick. I did find one issue, though, with svgs, which are image/svg so maybe we should limit this to really only inline jpg, png, and gif, by extension? But I am no fan of determining files by extension, and IMO getimgsize is too heavy; ------------------------------------------------------------------------ Tue, 05 Jul 2005 12:13:52 +0000 : stefan nagtegaal Can't you make use of PHP's <?php image_type_to_mime_type(); ?> or <?php image_type_to_extension(); ?> ------------------------------------------------------------------------ Tue, 05 Jul 2005 12:45:43 +0000 : Kobus Well, if not in the patch, I need inline functionality one way or another. inline.module works perfectly with the current upload.module to fulfill my needs, and if there is a way where someone can extend your proposed upload.module, that would get my +1, otherwise I will just remain neutral about this issue. inline.module makes use of $node->files and displays that image. If your patch still uses $node->files, then this is a non-issue. In other words, if I can, with inline.module, or with minor modifications to inline.module still show files inline, I am +1 for this. As for the themability question... I still disagree. You say "Simply not true. On most sites images are always placed in the same places." That is ONLY true because they have NO alternatives. Means the content is in the same places, because they have no other places to put them. I have made tens of static sites where the content does not resemble a fixed pattern or structure. For me, free-flow layout is my expression of my creativity. This is why I still even BOTHER with static sites; when Drupal don't do what I want it to do. If Drupal could do inline display of content properly, I'd never even build another static site. It is a great mistake people make (including myself), and that is they design the site before ANY content is available, and this happens a lot in static sites. But in dynamic sites, you have far less control over this, unless you have a VERY clean structure with limited information that can be added, and only a few people posting content. If you can have your content before you start the design, you will have a better fit. I can't see how you can anticipate every possible posting posted on your site if you have a diversity of users. Especially not if you're using a site such as an designer's showcase site where your creativity is shown by your web sites. Possible, but not easy. If I claim that I have "unique, fresh designs" I can certainly NOT give them a "box-like" site with "left and right side bars only". That's why I need inline content, this includes images AND boxes. Gerhard: Your concern about tags is answered as well above, if I am not mistaken. The patch need not provide the tags, but should provide for someone to develop a module that provide the filters or tags. To summarize: I don't need your patch to do the inline images. I just need your patch to be able to allow someone else to develop a module that can display inline files. Kobus ------------------------------------------------------------------------ Mon, 18 Jul 2005 09:56:38 +0000 : Bèr Kessels okay, so for all clarity, let me sumarise: * this patch introduces a chackbox "inline". If checked, the file will show up inline. IT will be appended to the teaser and the body. * this patch does *not* allow one to place images of files in a userdefined place in the body. * this patch does *not* do any resizing nor any thumbnailing. * This patch is meant to be simple, clear and transparant. No tokens, no javascript, no nothing. ------------------------------------------------------------------------ Mon, 18 Jul 2005 11:21:54 +0000 : Kobus Then I can't see how this patch could replace the existing upload.module, which allows you to use inline.module to place images inline. I therefore withdraw my +1 and go -1 on this (not that it matters, I believe). I think you didn't properly read my previous message. I said I don't need your patch to do all this, but I can't live without the functionality currently provided by the upload.module and inline.module combination. I agree that your patch don't need to have that functionality, but if your patch takes away this functionality, in other words, I can't (by hook or by crook) manage what I need to do, my vote is -1. Regards, Kobus ------------------------------------------------------------------------ Mon, 18 Jul 2005 19:58:34 +0000 : Bèr Kessels Kobus, And all the others looking fofr advanced inline systems: please do not -1 this. It will hep inline module a lot too. allthough not yet in this patch, but can you imagine a perission system for inline module, that comes for free? Or a core system, that makes inline module ten times smaller? it is this path! so, please, if it is not /exactly/ what you are looking for, at least look at the advantages for Joe Average, and even for the possibilties for your favorite inline-module. even imag_assist will gain an anomous usability impcact when usiong this module, for it can then finally use the upload module in full scale. Ber ------------------------------------------------------------------------ Sat, 23 Jul 2005 18:59:10 +0000 : Bèr Kessels Sohodjo jim: " I hope it matters. A big -1 on enforcing over-simplification at the expense of important and existing functionality. If automatic, uncontrollable placement of images becomes the standard, it will mean fewer not more image-rich Drupal sites as site owners/developers get complaints about "Why can't I control my images!" I _strongly_ encourage Ber to provide a "have it both ways" solution. Why not have an admin configuration setting for "allow inline tags" with default off. Change it to on and you get an additional upload checkbox for 'inline at tag' to accommodate the current functionality of the inline module while simultaneously allowing for default placement. " NOOO. people; please; look at the PATCH. Again: and hopefully last time: Simplicity. This patch does NOT replace ANYTHING inline module or img_assist wants to do. This patch hands better data to such modules. It hands a variable over to these modules, $node->file[FID]->inline, which tells these sorts of modules if people wnat that file to appear inline. AND it CAN (by default will) render a file in the most simple way inline. So really, if you want to -1 this patch, fine. But do not -1 it, because it does too little IYO. It still allows MUCH more than what you can do no, without that patch! And any solution, for core, that allows advanced handling of inline images will either require an enourmous amount of work, or it will simply no get in. So, unless you come up with a good core-worthy patch, this is still a big leap forward from what we have now. ------------------------------------------------------------------------ Sat, 23 Jul 2005 19:01:51 +0000 : Bèr Kessels :$ this is an attempt to fix the borken HML in the previous follow up. ------------------------------------------------------------------------ Sun, 24 Jul 2005 04:07:34 +0000 : TDobes Please don't combine unrelated changes together in the same patch. Moving stuff in/out of the _nodeapi hook has absolutely nothing to do with the patch and makes it much harder to read through the patch and see what it's actually doing. I'd appreciate it if you could separate the changes made here which are really relevant and move the other changes into another issue. Also: You change form_group_collapsible(t('File attachments') to form_group_collapsible(t('File Attachments'). A quick glance at some other core code seems to indicate that we've standardized on capitalizing only the first word in multi-word group titles. As for the functionality itself, I don't think this belongs in upload.module. It would be useful to have the functionality in core, but as a separate module which can be switched on and off. (upload_inline.module or something like that) If a site were set up using an inlining system from contrib and the functionality you're proposing could not be switched off, it would be extremely confusing to users that there are two different ways of inlining images. A minor comment: I'm not so sure whether the results of this patch, when inlining non-image attachments, will be the one users expect. A non-web-savvy person may expect his/her Word document (for instance) to appear inline with the node when they click "inline" -- just like their images do. I'd suggest that we limit inlining to images only. I'm not as adamant about this as the other issues, so I could be convinced otherwise if others disagree. ------------------------------------------------------------------------ Sun, 24 Jul 2005 07:58:19 +0000 : Bèr Kessels Thank you for your thoughts Tdobbes. As for the "moving things in and out of nodeapi" This was necessary, because otherwise the patch would have made the code even more unreadable. I agree with you on this point, but I simply had to clean it up a little, in order to be able to work in it. As it stands now, it is simply not possible to make this a separate module. We cannot hook into the files table. In a next stage, I might work out some hook for that table. But first things first. Can Dries or Steven please comment on his. I want to know If i should bother spending this enormous amount of time on commenting and debating this issue. If the chances are small this is accepted, Ill just drop it This ridiculous long thread reminds me again why I try to avoid making patches for core. ------------------------------------------------------------------------ Mon, 25 Jul 2005 05:49:37 +0000 : Steven Overall I like the concept, but I think it at least needs some default styling to make the image appear okay, like floating it. Right now it appears inline between whatever was there... very ugly. Sure you can say "leave it up to the themer" but if the goal is to provide a simple default, we can't expect people to dive into theming if they are going to use this feature instead of img_assist or whatever. Also, I wonder about the classes "upload" and "image". Is there a reason to use two classes? Isn't "image" a bit too generic? Oh and there is a missing XHTML / for the img tag. ------------------------------------------------------------------------ Mon, 25 Jul 2005 12:42:26 +0000 : Bèr Kessels I will fix the broken Xhttml. I chose "image" because it is exactly the same as the .image class used by image.module. But I will see to it, to add more functionality. I agree that it is not up to the themer for some good defaults, thus I will add a line of CSS to drupal.css (*shiver* ;) ) upload, IMO does not communicate well enough what the Image is doing. Not sure yet how I ill fix this, but I will see to it to come up with a better CSS/theme solution. Thanks! ------------------------------------------------------------------------ Tue, 26 Jul 2005 14:18:23 +0000 : Bèr Kessels Attachment: http://drupal.org/files/issues/upload_inline_0.patch (12.24 KB) Suggestions by Steven are now included. I very simple float is added to the inline images in drupal.css. XHTML fixed. And I cleaned up some old crufty comments, as suggested by Dries. ------------------------------------------------------------------------ Tue, 26 Jul 2005 17:05:45 +0000 : fax8 What is proposed here is a good idea. But I think that this is done in not good way. I think that upload.module should be only a layer between file system and modules. So modify upload module to add a specific feature like your inline for me is not good. but I like the idea to add checkboxes for enable interaction modules between modules and upload.module. Maybe we could design an of api wich let modules tell upload.module that they can interact with it. I make an example: I'm a developer of video.module. Now to add a video file to video.module one need to put the file into drupal folders using ftp and then insert the path to the file during node creation. One of the features our users are asking a lot is the possibility to directly upload a video file to dupal. So I should write a lot of code, settings, security buggy code.. that for me isn't useful. What about if only calling an upload.module api I should enable a new checkbox on upload form called "use as video file" which let me use the file as a video file on my module??? What do you think about it???? ------------------------------------------------------------------------ Tue, 26 Jul 2005 20:00:03 +0000 : Bèr Kessels fax: upload /is/ such a layer. Just look at how image module does it. You need not write any additional 'buggy' code, you can use all teh upload functionality. The upload interface (the table and list), however, is tightly integrated, so that drupal offers an out-of-the-box file system. Nox, my patch simply adds an "out of the box" inline functionality. Small and simple. For any more advanced file features you should use or write a module that, in turn, uses the uplaod.module. ------------------------------------------------------------------------ Wed, 27 Jul 2005 11:22:40 +0000 : stefan nagtegaal After discussing with Ber, I think this patch has some great potential though the simplicity of it.. For the people who don't completely agree what this patch does: - It adds an extra checkbox for each attachment. If the 'Inline' checkbox is checked, images are displayed inline in your post and other attachments (like .pdf, .ppt, or whatever) were transformed into links. The potential of this patch is in the fact that this makes it much, much easier to have another contrib module which makes it possible to let you choose at the node submission how you would like your node to be displayed, incl. the selected inline attachments to be displayed (using _nodeapi()). So, a big +1 from me on this.. ------------------------------------------------------------------------ Wed, 27 Jul 2005 11:27:52 +0000 : Kobus > - It adds an extra checkbox for each attachment. If the 'Inline' > checkbox is checked, images are displayed inline in your post and other > attachments (like .pdf, .ppt, or whatever) were transformed into links. Does this mean it is done automatically or do I have control over this? I don't want the images to be inline if I can't control where I put it. Let me just clarify my position on this short-and-sweet-like: If it breaks the existing functionality that upload.module + inline.module provides without opening the door for a replacement, then I am -1, otherwise +1. :-) Kobus

1 0

[drupal-devel] [task] Extend db_query()
by Cvbge 27 Jul '05

27 Jul '05

Issue status update for http://drupal.org/node/17656 Post a follow up: http://drupal.org/project/comments/add/17656 Project: Drupal Version: cvs Component: database system Category: tasks Priority: normal Assigned to: killes(a)www.drop.org Reported by: killes(a)www.drop.org Updated by: Cvbge Status: patch "After some discussion with Adrian at Drupal Con we found out that we do not know why node_save currently works with pgsql. " Well, it does not work. Real life exampless of not-working include flexinode (my experience) and forum module (as someone reported). Probably also others. The bug occurs when a normal user (but with necessarily rights) adds a node and he has no controls (the 'moderated', 'sticky', 'published' etc). The, in node_load() $node->sticky, $node->moderated (and maybe others) are set to FALSE (or TRUE, but in this case it works). When doing printf("%s", FALSE) the FALSE is change to empty string. The sticky and moderated db fields are numeric and postgresql do not accept '' (empty string) as a value of integer type. The result is for example such error: warning: pg_query(): Query failed: ERROR: invalid input syntax for integer: "" in ..../includes/database.pgsql.inc on line 45. user error: query: INSERT INTO node (title, uid, type, teaser, status, moderate, promote, sticky, body, comment, created, changed, nid) VALUES('xx', '2', 'flexinode-1', '<div class="flexinode-body flexinode-1"><div class="flexinode-image-3"><div class="form-item"> <label>Zdjęcie:</label><br /> <img alt="xx" src="..../pliki/" /><br />Get original file (28KB) [1] </div> </div></div>', '1', '', '1', '', '<div class="flexinode-body flexinode-1"><div class="flexinode-image-3"><div class="form-item"> <label>Zdjęcie:</label><br /> <img alt="xx" src="..../pliki/" /><br />Get original file (28KB) [2] </div> < in ..../includes/database.pgsql.inc on line 62. [1] http://drupal.org/..../pliki//tmp/male.jpg [2] http://drupal.org/..../pliki//tmp/male.jpg Cvbge Previous comments: ------------------------------------------------------------------------ Mon, 21 Feb 2005 12:48:30 +0000 : killes(a)www.drop.org Attachment: http://drupal.org/files/issues/db-query.patch (2.16 KB) We should make our database abstraction layer more robust and ensure that module authors can use it without string manipulations inside the query. Several queries use implode() to get their arguments into the query. This is undesirable as we rely on the module author to check the keys and values of such arrays for exploitation attempts. I have created the attached patch which shouldbe able to allow us to not use implode anymore. A minor problem is that all inserted values will be treated as strings. This might be a problem with PostgreSQL at least. However, the same strategy is already used in Drupal core without any complaints I know of. Summary: This patch will alow us to simplify some code in node.module, user.module, taxonomy.module and probably others. ------------------------------------------------------------------------ Mon, 21 Feb 2005 17:03:58 +0000 : killes(a)www.drop.org It's a patch. ------------------------------------------------------------------------ Mon, 21 Feb 2005 17:19:13 +0000 : killes(a)www.drop.org Attachment: http://drupal.org/files/issues/db-query_0.patch (2.07 KB) Squeezed out two lines of code after consultation with Karoly. Adds only 10 loc (plus some docs). ------------------------------------------------------------------------ Mon, 21 Feb 2005 17:23:08 +0000 : chx Do I need to say +1? ------------------------------------------------------------------------ Thu, 03 Mar 2005 00:15:10 +0000 : killes(a)www.drop.org Attachment: http://drupal.org/files/issues/db-query_1.patch (2.69 KB) After some discussion with Adrian at Drupal Con we found out that we do not know why node_save currently works with pgsql. It currently assumes that all db columns are strings. It seems to work but we should not rely on it. Here is a patch that checks for the type of field that is inserted. It needs testing. ------------------------------------------------------------------------ Tue, 26 Jul 2005 01:17:04 +0000 : drumm +1 for making this into an API. I've seen too many hacked together query builders in Drupal and Contrib. I have not tested. ------------------------------------------------------------------------ Wed, 27 Jul 2005 11:30:29 +0000 : Bèr Kessels untested. a big +1 for the feature ------------------------------------------------------------------------ Wed, 27 Jul 2005 11:41:52 +0000 : killes(a)www.drop.org the patch still applies. the new patch here updates node_save to use it. Untested. ------------------------------------------------------------------------ Wed, 27 Jul 2005 11:42:24 +0000 : killes(a)www.drop.org Attachment: http://drupal.org/files/issues/node-%a.patch (926 bytes) the patch still applies. the new patch here updates node_save to use it. Untested.

1 0

[drupal-devel] [task] Extend db_query()
by killes 27 Jul '05

27 Jul '05

Issue status update for http://drupal.org/node/17656 Post a follow up: http://drupal.org/project/comments/add/17656 Project: Drupal Version: cvs Component: database system Category: tasks Priority: normal Assigned to: killes(a)www.drop.org Reported by: killes(a)www.drop.org Updated by: killes(a)www.drop.org Status: patch Attachment: http://drupal.org/files/issues/node-%a.patch (926 bytes) the patch still applies. the new patch here updates node_save to use it. Untested. killes(a)www.drop.org Previous comments: ------------------------------------------------------------------------ Mon, 21 Feb 2005 12:48:30 +0000 : killes(a)www.drop.org Attachment: http://drupal.org/files/issues/db-query.patch (2.16 KB) We should make our database abstraction layer more robust and ensure that module authors can use it without string manipulations inside the query. Several queries use implode() to get their arguments into the query. This is undesirable as we rely on the module author to check the keys and values of such arrays for exploitation attempts. I have created the attached patch which shouldbe able to allow us to not use implode anymore. A minor problem is that all inserted values will be treated as strings. This might be a problem with PostgreSQL at least. However, the same strategy is already used in Drupal core without any complaints I know of. Summary: This patch will alow us to simplify some code in node.module, user.module, taxonomy.module and probably others. ------------------------------------------------------------------------ Mon, 21 Feb 2005 17:03:58 +0000 : killes(a)www.drop.org It's a patch. ------------------------------------------------------------------------ Mon, 21 Feb 2005 17:19:13 +0000 : killes(a)www.drop.org Attachment: http://drupal.org/files/issues/db-query_0.patch (2.07 KB) Squeezed out two lines of code after consultation with Karoly. Adds only 10 loc (plus some docs). ------------------------------------------------------------------------ Mon, 21 Feb 2005 17:23:08 +0000 : chx Do I need to say +1? ------------------------------------------------------------------------ Thu, 03 Mar 2005 00:15:10 +0000 : killes(a)www.drop.org Attachment: http://drupal.org/files/issues/db-query_1.patch (2.69 KB) After some discussion with Adrian at Drupal Con we found out that we do not know why node_save currently works with pgsql. It currently assumes that all db columns are strings. It seems to work but we should not rely on it. Here is a patch that checks for the type of field that is inserted. It needs testing. ------------------------------------------------------------------------ Tue, 26 Jul 2005 01:17:04 +0000 : drumm +1 for making this into an API. I've seen too many hacked together query builders in Drupal and Contrib. I have not tested. ------------------------------------------------------------------------ Wed, 27 Jul 2005 11:30:29 +0000 : Bèr Kessels untested. a big +1 for the feature ------------------------------------------------------------------------ Wed, 27 Jul 2005 11:41:52 +0000 : killes(a)www.drop.org the patch still applies. the new patch here updates node_save to use it. Untested.

1 0

[drupal-devel] [task] Extend db_query()
by killes 27 Jul '05

27 Jul '05

Issue status update for http://drupal.org/node/17656 Post a follow up: http://drupal.org/project/comments/add/17656 Project: Drupal Version: cvs Component: database system Category: tasks Priority: normal Assigned to: killes(a)www.drop.org Reported by: killes(a)www.drop.org Updated by: killes(a)www.drop.org Status: patch the patch still applies. the new patch here updates node_save to use it. Untested. killes(a)www.drop.org Previous comments: ------------------------------------------------------------------------ Mon, 21 Feb 2005 12:48:30 +0000 : killes(a)www.drop.org Attachment: http://drupal.org/files/issues/db-query.patch (2.16 KB) We should make our database abstraction layer more robust and ensure that module authors can use it without string manipulations inside the query. Several queries use implode() to get their arguments into the query. This is undesirable as we rely on the module author to check the keys and values of such arrays for exploitation attempts. I have created the attached patch which shouldbe able to allow us to not use implode anymore. A minor problem is that all inserted values will be treated as strings. This might be a problem with PostgreSQL at least. However, the same strategy is already used in Drupal core without any complaints I know of. Summary: This patch will alow us to simplify some code in node.module, user.module, taxonomy.module and probably others. ------------------------------------------------------------------------ Mon, 21 Feb 2005 17:03:58 +0000 : killes(a)www.drop.org It's a patch. ------------------------------------------------------------------------ Mon, 21 Feb 2005 17:19:13 +0000 : killes(a)www.drop.org Attachment: http://drupal.org/files/issues/db-query_0.patch (2.07 KB) Squeezed out two lines of code after consultation with Karoly. Adds only 10 loc (plus some docs). ------------------------------------------------------------------------ Mon, 21 Feb 2005 17:23:08 +0000 : chx Do I need to say +1? ------------------------------------------------------------------------ Thu, 03 Mar 2005 00:15:10 +0000 : killes(a)www.drop.org Attachment: http://drupal.org/files/issues/db-query_1.patch (2.69 KB) After some discussion with Adrian at Drupal Con we found out that we do not know why node_save currently works with pgsql. It currently assumes that all db columns are strings. It seems to work but we should not rely on it. Here is a patch that checks for the type of field that is inserted. It needs testing. ------------------------------------------------------------------------ Tue, 26 Jul 2005 01:17:04 +0000 : drumm +1 for making this into an API. I've seen too many hacked together query builders in Drupal and Contrib. I have not tested. ------------------------------------------------------------------------ Wed, 27 Jul 2005 11:30:29 +0000 : Bèr Kessels untested. a big +1 for the feature

1 0

[drupal-devel] [task] Extend db_query()
by Bèr Kessels 27 Jul '05

27 Jul '05

Issue status update for http://drupal.org/node/17656 Post a follow up: http://drupal.org/project/comments/add/17656 Project: Drupal Version: cvs Component: database system Category: tasks Priority: normal Assigned to: killes(a)www.drop.org Reported by: killes(a)www.drop.org Updated by: Bèr Kessels Status: patch untested. a big +1 for the feature Bèr Kessels Previous comments: ------------------------------------------------------------------------ Mon, 21 Feb 2005 12:48:30 +0000 : killes(a)www.drop.org Attachment: http://drupal.org/files/issues/db-query.patch (2.16 KB) We should make our database abstraction layer more robust and ensure that module authors can use it without string manipulations inside the query. Several queries use implode() to get their arguments into the query. This is undesirable as we rely on the module author to check the keys and values of such arrays for exploitation attempts. I have created the attached patch which shouldbe able to allow us to not use implode anymore. A minor problem is that all inserted values will be treated as strings. This might be a problem with PostgreSQL at least. However, the same strategy is already used in Drupal core without any complaints I know of. Summary: This patch will alow us to simplify some code in node.module, user.module, taxonomy.module and probably others. ------------------------------------------------------------------------ Mon, 21 Feb 2005 17:03:58 +0000 : killes(a)www.drop.org It's a patch. ------------------------------------------------------------------------ Mon, 21 Feb 2005 17:19:13 +0000 : killes(a)www.drop.org Attachment: http://drupal.org/files/issues/db-query_0.patch (2.07 KB) Squeezed out two lines of code after consultation with Karoly. Adds only 10 loc (plus some docs). ------------------------------------------------------------------------ Mon, 21 Feb 2005 17:23:08 +0000 : chx Do I need to say +1? ------------------------------------------------------------------------ Thu, 03 Mar 2005 00:15:10 +0000 : killes(a)www.drop.org Attachment: http://drupal.org/files/issues/db-query_1.patch (2.69 KB) After some discussion with Adrian at Drupal Con we found out that we do not know why node_save currently works with pgsql. It currently assumes that all db columns are strings. It seems to work but we should not rely on it. Here is a patch that checks for the type of field that is inserted. It needs testing. ------------------------------------------------------------------------ Tue, 26 Jul 2005 01:17:04 +0000 : drumm +1 for making this into an API. I've seen too many hacked together query builders in Drupal and Contrib. I have not tested.

1 0

[drupal-devel] [feature] add inline functionaliy to uploads
by Kobus 27 Jul '05

27 Jul '05

Issue status update for http://drupal.org/node/26288 Post a follow up: http://drupal.org/project/comments/add/26288 Project: Drupal Version: cvs Component: upload.module Category: feature requests Priority: normal Assigned to: Anonymous Reported by: Bèr Kessels Updated by: Kobus Status: patch > - It adds an extra checkbox for each attachment. If the 'Inline' > checkbox is checked, images are displayed inline in your post and other > attachments (like .pdf, .ppt, or whatever) were transformed into links. Does this mean it is done automatically or do I have control over this? I don't want the images to be inline if I can't control where I put it. Let me just clarify my position on this short-and-sweet-like: If it breaks the existing functionality that upload.module + inline.module provides without opening the door for a replacement, then I am -1, otherwise +1. :-) Kobus Kobus Previous comments: ------------------------------------------------------------------------ Sun, 03 Jul 2005 18:03:35 +0000 : Bèr Kessels Attachment: http://drupal.org/files/issues/upload_inline.patch (19.05 KB) One of the most often asked features is proper inlnie handling of files. Look at the amount of solutions, the popularity of image_assist, and the amount of peolpe dowloading image.module! That alone should be enough proof that Drupal lacks proper inline image support. This patch adds that to core. In fact, it does little more then appending a link of img tag to the body or the teaser. Off course that is configurable per file. Next to the [] list checkbox, this patch adds an [] inline checkbox. Simplicity is the foundation of this patch. I want no stles for inline editing, no fancy html wrappers, no tokens, just $node->body or teaser appended with a small html string. Another small themable funtion is introduced, (hey, you cannot expect me to develop something without adding more power for themers, now, can you? ;) ), that allows people to theme the string that is appended to the body or the teaser. Oh, and also note hat the biggest part of this patch is some cleaning I had to do in order to be able to develop properly. I dont like Ifs inside cases in foreaches inside swiches. in other words: nodeapi now calls functions instead of executing code directly. ------------------------------------------------------------------------ Sun, 03 Jul 2005 18:19:25 +0000 : Bèr Kessels Attachment: http://drupal.org/files/issues/inline.patch.screenshot.png (26.68 KB) here is how the form now looks ------------------------------------------------------------------------ Sun, 03 Jul 2005 18:19:58 +0000 : Bèr Kessels Attachment: http://drupal.org/files/issues/inline.patch.screenshot3.png (30.53 KB) and this is an example of inlined images and a .doc file. ------------------------------------------------------------------------ Sun, 03 Jul 2005 20:44:00 +0000 : sepeck changing to patch per request from berkes ------------------------------------------------------------------------ Tue, 05 Jul 2005 07:46:13 +0000 : Kobus This gets a +1 from me in principle, however, the [inline:xx] tag with inline.module gives you greater freedom as to where the inline image must be displayed. If you can add this functionality (I haven't checked the code, I don't know if it is in there) it would be a great addition for Core. This same strategy can be used for inline blocks, I am sure. Regards, Kobus ------------------------------------------------------------------------ Tue, 05 Jul 2005 08:57:50 +0000 : Bèr Kessels there are a couple of reasons why i did not include the [inline] tags. * I aimed for extreme simplicity: a checkbox shows an image inline: its up to the theme where it appears (if one does not like it before/above the body and teaser.). Simplicity was the main goal. * We don't have any tokens in core. And we should not have them. * Tokens are a very bad substitute for a good interface. They give less power then plain HTLM. Are much worst documented then HTML, but in the mean time, they are still as hard to learn as HTML. (Yes, I know people _think_ they are easier, but there _is_ not difference between [ ] and , only that its a different ascii char. So, no. I don't allow any placement of the image. I leave that that for dedicated modules, or the themer to decide. ------------------------------------------------------------------------ Tue, 05 Jul 2005 09:34:06 +0000 : Kobus So you will provide an API to do this? For example, with perhaps minor modifications, the inline.module will be able to display these files? In that case I am happy. If not, then I can't give my support to this patch (as if that matters...). A themer can't do this task as inline images (and blocks for that matter) is too dynamic for theming; it can be placed anywhere in a node where the user pleases. This means for me that there should be a module for this, such as inline module that allows you to define [inline:xx] tags. If your module emits an array of uploaded files (such as upload.module), inline.module can be, with minor changes, adapted to show these files inline. To show you what I mean with the content is too dynamic for a themer to perform this task, look at this screenshot related to inline blocks (inline images can follow the same pattern): http://drupal.org/files/issues/regions---possibility-3.png ------------------------------------------------------------------------ Tue, 05 Jul 2005 11:26:15 +0000 : Bèr Kessels Kobus, We are dealing with different issues here: You want a method to place images, files or so anywhere in the post. That is fine, but certainly NOT addressed in the patch! I made patch that *only* adds marked files to the body. its really nothing more then <?php $node->body = $filestring . $node->body ?> No APIS, no, dynamic tokens, no filters, nothing. However, what I meant with themers, is that there now is a theme_upload_inline available, so you can theme the abovementioned $filestring. On top of that $node->files[FILEID]->inline is TRUE if a file is flagged for inline. So in node.tpl.php, or wherever you want to theme a node, you can print nice images inline, when that flag is set. And about the comment that a themer cant do this: Simply not true. On most sites images are always placed in the same places. REally, even the sites see which use img_assist or inline, use them to place the images on the exact same places in every node. People /think/ they want the power to place images anywhere, but they hardly ever use that power. Just look at all the big news/publishing sites out there (BBC, CNN, BoigBoing, r even freshmeat) images are all placed acc. to the theme. They are not placed in random places by authors. So if you are one of the few that still want that power, there aer mots of power tools like inline module or img_assist. We should offer a good default, one that is simple. ------------------------------------------------------------------------ Tue, 05 Jul 2005 11:41:34 +0000 : Gerhard Killesreiter I fully agree that tags are evil. Kobus: You can always look for tags in $node->body in your theme's node function. ------------------------------------------------------------------------ Tue, 05 Jul 2005 11:50:52 +0000 : stefan nagtegaal Ber, the theme-function in your code looks like: <?php +/** + * Theme function for rendering of inline images + * @param $file a file object. + * @param $image a Boolean, indicating whether an img tag (TRUE) or an anchor tag (FALSE) should be used. + * @ingroup themable + */ +function theme_upload_inline($file, $image) { + if ($image) { + return '<img src="'. check_url(($file->fid ? file_create_url($file->filepath) : url(file_create_filename($file->filename, file_create_path())))) .'" alt="'. check_plain($file->filename) .'" class="upload inline">'; + } + else { + return ''. check_plain($file->filename) .' [1]'; + } + +} ?> After looking at your code it's not clear to me when $image is TRUE or FALSE, can you elaborate on me please? [1] http://drupal.org/'. check_url(($file->fid ? file_create_url($file->filepath) : url(file_create_filename($file->filename, file_create_path())))) .'\" class=\"upload inline ------------------------------------------------------------------------ Tue, 05 Jul 2005 12:06:39 +0000 : Bèr Kessels The function calling the theme function should decide whether its an image. IMO that is far too hardcore code for a themer ;) <?php $image = ereg('^(image/)', $file->filemime); ?> inside _upload_inline() does the trick. I did find one issue, though, with svgs, which are image/svg so maybe we should limit this to really only inline jpg, png, and gif, by extension? But I am no fan of determining files by extension, and IMO getimgsize is too heavy; ------------------------------------------------------------------------ Tue, 05 Jul 2005 12:13:52 +0000 : stefan nagtegaal Can't you make use of PHP's <?php image_type_to_mime_type(); ?> or <?php image_type_to_extension(); ?> ------------------------------------------------------------------------ Tue, 05 Jul 2005 12:45:43 +0000 : Kobus Well, if not in the patch, I need inline functionality one way or another. inline.module works perfectly with the current upload.module to fulfill my needs, and if there is a way where someone can extend your proposed upload.module, that would get my +1, otherwise I will just remain neutral about this issue. inline.module makes use of $node->files and displays that image. If your patch still uses $node->files, then this is a non-issue. In other words, if I can, with inline.module, or with minor modifications to inline.module still show files inline, I am +1 for this. As for the themability question... I still disagree. You say "Simply not true. On most sites images are always placed in the same places." That is ONLY true because they have NO alternatives. Means the content is in the same places, because they have no other places to put them. I have made tens of static sites where the content does not resemble a fixed pattern or structure. For me, free-flow layout is my expression of my creativity. This is why I still even BOTHER with static sites; when Drupal don't do what I want it to do. If Drupal could do inline display of content properly, I'd never even build another static site. It is a great mistake people make (including myself), and that is they design the site before ANY content is available, and this happens a lot in static sites. But in dynamic sites, you have far less control over this, unless you have a VERY clean structure with limited information that can be added, and only a few people posting content. If you can have your content before you start the design, you will have a better fit. I can't see how you can anticipate every possible posting posted on your site if you have a diversity of users. Especially not if you're using a site such as an designer's showcase site where your creativity is shown by your web sites. Possible, but not easy. If I claim that I have "unique, fresh designs" I can certainly NOT give them a "box-like" site with "left and right side bars only". That's why I need inline content, this includes images AND boxes. Gerhard: Your concern about tags is answered as well above, if I am not mistaken. The patch need not provide the tags, but should provide for someone to develop a module that provide the filters or tags. To summarize: I don't need your patch to do the inline images. I just need your patch to be able to allow someone else to develop a module that can display inline files. Kobus ------------------------------------------------------------------------ Mon, 18 Jul 2005 09:56:38 +0000 : Bèr Kessels okay, so for all clarity, let me sumarise: * this patch introduces a chackbox "inline". If checked, the file will show up inline. IT will be appended to the teaser and the body. * this patch does *not* allow one to place images of files in a userdefined place in the body. * this patch does *not* do any resizing nor any thumbnailing. * This patch is meant to be simple, clear and transparant. No tokens, no javascript, no nothing. ------------------------------------------------------------------------ Mon, 18 Jul 2005 11:21:54 +0000 : Kobus Then I can't see how this patch could replace the existing upload.module, which allows you to use inline.module to place images inline. I therefore withdraw my +1 and go -1 on this (not that it matters, I believe). I think you didn't properly read my previous message. I said I don't need your patch to do all this, but I can't live without the functionality currently provided by the upload.module and inline.module combination. I agree that your patch don't need to have that functionality, but if your patch takes away this functionality, in other words, I can't (by hook or by crook) manage what I need to do, my vote is -1. Regards, Kobus ------------------------------------------------------------------------ Mon, 18 Jul 2005 19:58:34 +0000 : Bèr Kessels Kobus, And all the others looking fofr advanced inline systems: please do not -1 this. It will hep inline module a lot too. allthough not yet in this patch, but can you imagine a perission system for inline module, that comes for free? Or a core system, that makes inline module ten times smaller? it is this path! so, please, if it is not /exactly/ what you are looking for, at least look at the advantages for Joe Average, and even for the possibilties for your favorite inline-module. even imag_assist will gain an anomous usability impcact when usiong this module, for it can then finally use the upload module in full scale. Ber ------------------------------------------------------------------------ Sat, 23 Jul 2005 18:59:10 +0000 : Bèr Kessels Sohodjo jim: " I hope it matters. A big -1 on enforcing over-simplification at the expense of important and existing functionality. If automatic, uncontrollable placement of images becomes the standard, it will mean fewer not more image-rich Drupal sites as site owners/developers get complaints about "Why can't I control my images!" I _strongly_ encourage Ber to provide a "have it both ways" solution. Why not have an admin configuration setting for "allow inline tags" with default off. Change it to on and you get an additional upload checkbox for 'inline at tag' to accommodate the current functionality of the inline module while simultaneously allowing for default placement. " NOOO. people; please; look at the PATCH. Again: and hopefully last time: Simplicity. This patch does NOT replace ANYTHING inline module or img_assist wants to do. This patch hands better data to such modules. It hands a variable over to these modules, $node->file[FID]->inline, which tells these sorts of modules if people wnat that file to appear inline. AND it CAN (by default will) render a file in the most simple way inline. So really, if you want to -1 this patch, fine. But do not -1 it, because it does too little IYO. It still allows MUCH more than what you can do no, without that patch! And any solution, for core, that allows advanced handling of inline images will either require an enourmous amount of work, or it will simply no get in. So, unless you come up with a good core-worthy patch, this is still a big leap forward from what we have now. ------------------------------------------------------------------------ Sat, 23 Jul 2005 19:01:51 +0000 : Bèr Kessels :$ this is an attempt to fix the borken HML in the previous follow up. ------------------------------------------------------------------------ Sun, 24 Jul 2005 04:07:34 +0000 : TDobes Please don't combine unrelated changes together in the same patch. Moving stuff in/out of the _nodeapi hook has absolutely nothing to do with the patch and makes it much harder to read through the patch and see what it's actually doing. I'd appreciate it if you could separate the changes made here which are really relevant and move the other changes into another issue. Also: You change form_group_collapsible(t('File attachments') to form_group_collapsible(t('File Attachments'). A quick glance at some other core code seems to indicate that we've standardized on capitalizing only the first word in multi-word group titles. As for the functionality itself, I don't think this belongs in upload.module. It would be useful to have the functionality in core, but as a separate module which can be switched on and off. (upload_inline.module or something like that) If a site were set up using an inlining system from contrib and the functionality you're proposing could not be switched off, it would be extremely confusing to users that there are two different ways of inlining images. A minor comment: I'm not so sure whether the results of this patch, when inlining non-image attachments, will be the one users expect. A non-web-savvy person may expect his/her Word document (for instance) to appear inline with the node when they click "inline" -- just like their images do. I'd suggest that we limit inlining to images only. I'm not as adamant about this as the other issues, so I could be convinced otherwise if others disagree. ------------------------------------------------------------------------ Sun, 24 Jul 2005 07:58:19 +0000 : Bèr Kessels Thank you for your thoughts Tdobbes. As for the "moving things in and out of nodeapi" This was necessary, because otherwise the patch would have made the code even more unreadable. I agree with you on this point, but I simply had to clean it up a little, in order to be able to work in it. As it stands now, it is simply not possible to make this a separate module. We cannot hook into the files table. In a next stage, I might work out some hook for that table. But first things first. Can Dries or Steven please comment on his. I want to know If i should bother spending this enormous amount of time on commenting and debating this issue. If the chances are small this is accepted, Ill just drop it This ridiculous long thread reminds me again why I try to avoid making patches for core. ------------------------------------------------------------------------ Mon, 25 Jul 2005 05:49:37 +0000 : Steven Overall I like the concept, but I think it at least needs some default styling to make the image appear okay, like floating it. Right now it appears inline between whatever was there... very ugly. Sure you can say "leave it up to the themer" but if the goal is to provide a simple default, we can't expect people to dive into theming if they are going to use this feature instead of img_assist or whatever. Also, I wonder about the classes "upload" and "image". Is there a reason to use two classes? Isn't "image" a bit too generic? Oh and there is a missing XHTML / for the img tag. ------------------------------------------------------------------------ Mon, 25 Jul 2005 12:42:26 +0000 : Bèr Kessels I will fix the broken Xhttml. I chose "image" because it is exactly the same as the .image class used by image.module. But I will see to it, to add more functionality. I agree that it is not up to the themer for some good defaults, thus I will add a line of CSS to drupal.css (*shiver* ;) ) upload, IMO does not communicate well enough what the Image is doing. Not sure yet how I ill fix this, but I will see to it to come up with a better CSS/theme solution. Thanks! ------------------------------------------------------------------------ Tue, 26 Jul 2005 14:18:23 +0000 : Bèr Kessels Attachment: http://drupal.org/files/issues/upload_inline_0.patch (12.24 KB) Suggestions by Steven are now included. I very simple float is added to the inline images in drupal.css. XHTML fixed. And I cleaned up some old crufty comments, as suggested by Dries. ------------------------------------------------------------------------ Tue, 26 Jul 2005 17:05:45 +0000 : fax8 What is proposed here is a good idea. But I think that this is done in not good way. I think that upload.module should be only a layer between file system and modules. So modify upload module to add a specific feature like your inline for me is not good. but I like the idea to add checkboxes for enable interaction modules between modules and upload.module. Maybe we could design an of api wich let modules tell upload.module that they can interact with it. I make an example: I'm a developer of video.module. Now to add a video file to video.module one need to put the file into drupal folders using ftp and then insert the path to the file during node creation. One of the features our users are asking a lot is the possibility to directly upload a video file to dupal. So I should write a lot of code, settings, security buggy code.. that for me isn't useful. What about if only calling an upload.module api I should enable a new checkbox on upload form called "use as video file" which let me use the file as a video file on my module??? What do you think about it???? ------------------------------------------------------------------------ Tue, 26 Jul 2005 20:00:03 +0000 : Bèr Kessels fax: upload /is/ such a layer. Just look at how image module does it. You need not write any additional 'buggy' code, you can use all teh upload functionality. The upload interface (the table and list), however, is tightly integrated, so that drupal offers an out-of-the-box file system. Nox, my patch simply adds an "out of the box" inline functionality. Small and simple. For any more advanced file features you should use or write a module that, in turn, uses the uplaod.module. ------------------------------------------------------------------------ Wed, 27 Jul 2005 11:22:40 +0000 : stefan nagtegaal After discussing with Ber, I think this patch has some great potential though the simplicity of it.. For the people who don't completely agree what this patch does: - It adds an extra checkbox for each attachment. If the 'Inline' checkbox is checked, images are displayed inline in your post and other attachments (like .pdf, .ppt, or whatever) were transformed into links. The potential of this patch is in the fact that this makes it much, much easier to have another contrib module which makes it possible to let you choose at the node submission how you would like your node to be displayed, incl. the selected inline attachments to be displayed (using _nodeapi()). So, a big +1 from me on this..

1 0